The MAX5069 is a high-frequency, current-mode,
pulse-width modulation (PWM) controller (with dual
MOSFET drivers) that integrates all the building blocks
necessary for implementing AC-DC or DC-DC fixed-frequency
power supplies. Isolated or nonisolated pushpull
and half/full-bridge power supplies are easily
constructed using either primary- or secondary-side
regulation. Current-mode control with leading-edge
blanking simplifies control-loop design and a programmable
internal slope-compensation circuit stabilizes the
current loop when operating at duty cycles above 50%.
An input undervoltage lockout (UVLO) programs the
input-supply startup voltage and ensures proper operation
during brownout conditions.
A single external resistor programs the oscillator frequency
from 50kHz to 2.5MHz. The MAX5069A/D provide a
SYNC input for synchronization to an external clock. The
maximum FET-driver duty cycle for the MAX5069 is 50%.
Programmable dead time allows additional flexibility in
optimizing magnetic design and overcoming parasitic
effects. Programmable hiccup current limit provides
additional protection under severe faults.
The MAX5069 is specified over the -40°C to +125°C automotive
temperature range and is available in a
16-pin thermally enhanced TSSOP-EP package. Refer to
the MAX5068 data sheet for single FET-driver applications.
Warning: The MAX5069 is designed to work with high
voltages. Exercise caution.
Key Features
Applications/Uses
Current-Mode Control with 47µA (typ) Startup Current
Oscillator Frequency Programmable to 2.5MHz
Resistor-Programmable ±4.5% Accurate Switching Frequency
Dual Gate-Drive Output for Half/Full-Bridge or Push-Pull Applications
Rectified 85VAC to 265VAC, or 36VDC to 72VDC Input (MAX5069A/B)
Input Directly Driven from 10.8V to 24V (MAX5069C/D)
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-16
of
16
MAX5069
Free Sample
Buy
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX5069AAUE
TSSOP;16 pin;
Dwg: 21-0108G (PDF)
Use pkgcode/variation: U16E-3*
Download
E-Mail
