The MAX3344E/MAX3345E USB transceivers convert logic-level signals to USB signals, and USB signals to logic-level signals. An internal 1.5kΩ USB pullup resistor supports full-speed (12Mbps) USB operation. The MAX3344E/MAX3345E provide built-in ±15kV ESD-protection circuitry on the USB I/O pins, D+ and D-, and VCC.
The MAX3344E/MAX3345E operate with logic supply voltages as low as 1.65V, ensuring compatibility with low-voltage ASICs. The suspend mode lowers supply current to less than 40µA. An enumerate function allows devices to logically disconnect while plugged in. The MAX3344E/MAX3345E are fully compliant with USB specification 1.1, and full-speed operation under USB specification 2.0.
The MAX3344E/MAX3345E have a USB detect that monitors the USB bus for insertion and signals this event. The MAX3344E USB_DET threshold is between 3.6V (min) and 4V (max), while the MAX3345E USB_DET threshold is between 1V (min) and 2.8V (max).
The MAX3344E/MAX3345E are available in the miniature 4 x 4 UCSP™, as well as the small 16-pin TSSOP, and are specified over the extended temperature range, -40°C to +85°C.
Key Features
Applications/Uses
±15kV ESD Protection On D+ and D-
Comply with USB Specification 1.1 (Full Speed 2.0)
Separate VP and VM Inputs/Outputs
VL Down to 1.65V Allows Connection with Low-Voltage ASICs
Enumerate Input—Allows USB Connection through Software
USB Detect Function
3.6V (min) to 4V (max)—MAX3344E
1V (min) to 2.8V (max)—MAX3345E
Allow Single-Ended or Differential Logic I/O
Internal Linear Regulator Allows Direct Powering from the USB
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
Download
E-Mail
