|
Description
|
The MAX9965/MAX9966 four-channel, low-power, high-speed
pin electronics driver and comparator ICs
include for each channel a three-level pin driver, comparator,
and variable clamps. The MAX9965/MAX9966
are similar to the MAX9963/MAX9964, but with even
lower window comparator dispersion for enhanced
accuracy. The driver features a wide voltage range and
high-speed operation, includes high-Z and active termination
(3rd-level drive) modes, and is highly linear even
at low-voltage swings. The dual bipolar-input comparator
provides very low dispersion (timing variation) over a
wide variety of input conditions. The clamps provide
damping of high-speed DUT waveforms when the
device is configured as a high-impedance receiver.
High-speed, differential control inputs compatible with
ECL, LVPECL, LVDS, and GTL levels are provided for
each channel. ECL/LVPECL or flexible open-collector
outputs are available for the comparators.
The A-grade version provides tight matching of gain
and offset for the driver and comparator, allowing reference
levels to be shared across multiple channels in
cost-sensitive systems. For system designs that incorporate
independent reference levels for each channel,
the B-grade version is available at reduced cost.
Optional internal resistors at the high-speed inputs provide
differential termination of LVDS inputs, while
optional internal resistors provide the pullup voltage
and source termination for open-collector comparator
outputs. These features significantly reduce the discrete
component count on the circuit board.
The MAX9965/MAX9966 operating range is -1.5V to
+6.5V, with power dissipation of only 975mW per channel.
These devices are available in a 100-pin, 14mm x
14mm body, 0.5mm pitch TQFP with an exposed 8mm
x 8mm die pad on the top (MAX9965) or bottom
(MAX9966) of the package for efficient heat removal.
The MAX9965/MAX9966 are specified to operate with
an internal die temperature of +60°C to +100°C, and
feature a die temperature monitor output.
|
| MAX9965 |
Free
Sample |
Buy |
Status |
|
Package:
|
TYPE PINS FOOTPRINT
|
| |
DRAWING CODE/VAR *
|
|
Temp |
RoHS/Lead-Free?
Materials Analysis |
MAX9965BGCCQ-D
|
|
|
Active
|
TQFP-EU;100 pin;256 mm²
Outline Drawing: 21-0148 (PDF)
Land Pattern: 90-0159 (PDF)
Use pkgcode/variation: C100E-8R*
|
0°C to +70°C
|
RoHS/Lead-Free: No
Materials Analysis
|
MAX9965BGCCQ-TD
|
|
|
Active
|
Land Pattern: Not Available
|
0°C to +70°C
|
See data sheet
|
MAX9965BJCCQ-D
|
|
|
Active
|
TQFP-EU;100 pin;256 mm²
Outline Drawing: 21-0148 (PDF)
Land Pattern: 90-0159 (PDF)
Use pkgcode/variation: C100E-8R*
|
0°C to +70°C
|
RoHS/Lead-Free: No
Materials Analysis
|
MAX9965BJCCQ-TD
|
|
|
Active
|
Land Pattern: Not Available
|
0°C to +70°C
|
See data sheet
|
MAX9965BGCCQ+D
|
|
|
Active
|
Land Pattern: Not Available
|
0°C to +70°C
|
See data sheet
|
MAX9965BGCCQ+TD
|
|
|
Active
|
Land Pattern: Not Available
|
0°C to +70°C
|
See data sheet
|
MAX9965BJCCQ+D
|
|
|
Active
|
Land Pattern: Not Available
|
0°C to +70°C
|
See data sheet
|
MAX9965BJCCQ+TD
|
|
|
Active
|
Land Pattern: Not Available
|
0°C to +70°C
|
See data sheet
|
| MAX9966 |
Free
Sample |
Buy |
Status |
|
Package:
|
TYPE PINS FOOTPRINT
|
| |
DRAWING CODE/VAR *
|
|
Temp |
RoHS/Lead-Free?
Materials Analysis |
MAX9966BGCCQ-D
|
|
|
Active
|
TQFP-EP;100 pin;256 mm²
Outline Drawing: 21-0116 (PDF)
Land Pattern: 90-0153 (PDF)
Use pkgcode/variation: C100E-2*
|
0°C to +70°C
|
RoHS/Lead-Free: No
Materials Analysis
|
MAX9966BGCCQ-TD
|
|
|
Active
|
Land Pattern: Not Available
|
0°C to +70°C
|
See data sheet
|
MAX9966BGCCQ+D
|
|
|
Active
|
Land Pattern: Not Available
|
0°C to +70°C
|
See data sheet
|
MAX9966BGCCQ+TD
|
|
|
Active
|
Land Pattern: Not Available
|
0°C to +70°C
|
See data sheet
|
MAX9966AZCCQ
|
|
|
Active
|
TQFP-EP;100 pin;256 mm²
Outline Drawing: 21-0116 (PDF)
Land Pattern: 90-0153 (PDF)
Use pkgcode/variation: C100E-2*
|
0°C to +70°C
|
RoHS/Lead-Free: No
Materials Analysis
|
MAX9966AZCCQ-T
|
|
|
Active
|
Land Pattern: Not Available
|
0°C to +70°C
|
See data sheet
|
Download
E-Mail