The MAX5035 evaluation kit (EV kit) is a fully assembled
and tested surface-mount printed circuit board (PCB)
that contains a step-down DC-DC switching-regulator
circuit. The circuit utilizes a MAX5035 adjustable converter
configured for a 5V output and provides up to 1A
of current. The converter operates from a wide input
range of 8V to 76V.
The MAX5035 MAXPower IC features a built-in high-side
switch and an automatic pulse-skipping mode
operation. The MAX5035 EV kit demonstrates low quiescent
current and high efficiency up to 92%. The
MAX5035 MAXPower IC switches at 125kHz.
Warning: The MAX5035 EV kit is designed to operate
with high voltages. Dangerous voltages are present on
this EV kit and on equipment connected to it. Users
who power up this EV kit or power the sources connected
to it must be careful to follow appropriate safety procedures
when working with high-voltage electrical
equipment.
Under severe fault or failure conditions, this EV kit may
dissipate large amounts of power, which could result in
the mechanical ejection of a component or of component
debris at high velocity. Operate this EV kit with
care to avoid possible personal injury.
|
Download
E-Mail