The MAX7375 is a silicon oscillator, intended as a low-cost improvement replacing ceramic resonators, crystals, and crystal oscillator modules used as the clock source for microcontrollers and UARTs in 3V, 3.3V, and 5V applications.
The MAX7375 is a fully integrated oscillator, supplied at specific factory-trimmed frequencies with a rail-to-rail 50% duty cycle square-wave output. The oscillator frequency is generated directly without the use of a phase-locked loop (PLL). No additional components are used to set or adjust the frequency.
Unlike typical crystal and ceramic resonator oscillator circuits, the MAX7375 is highly resistant to vibration and EMI. The high output drive current and absence of high-impedance nodes also makes the oscillator less susceptible to dirty or humid operating conditions. With a wide operating temperature range, the oscillator is a good choice for demanding home appliance and automotive environments.
Available in 3-pin space-saving SC70 package, the MAX7375 is offered in standard and nonstandard factory-set frequencies ranging from 600kHz to 9.99MHz. See the MAX7381 data sheet for frequencies ≥ 10MHz. The MAX7375's standard operating temperature range is -40°C to +125°C. See the Applications Information section in the full data sheet for extended operating temperature range.
Key Features
Applications/Uses
2.7V to 5.5V Operation
Factory-Trimmed Oscillator (600kHz to 9.99MHz)
No External Components Required
±10mA Output Drive Current
2% Initial Accuracy
±50ppm/°C Temp Drift
Fast Startup Time: 5µs
40% to 60% Maximum Duty Cycle
5ns Output Rise and Fall Time-Low EMI
Very Low EMI Susceptibility-No High-Impedance Nodes
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-28
of
28
MAX7375
Free Sample
Buy
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX7375AXR604+
-40°C to +125°C
See data sheet
MAX7375AXR405-T
SC-70;3 pin;
Dwg: 21-0075C (PDF)
Use pkgcode/variation: X3-2*
Download
E-Mail
