The MAX1419 is a 5V, high-speed, high-performance
analog-to-digital converter (ADC) featuring a fully differential
wideband track-and-hold (T/H) and a 15-bit converter
core. The MAX1419 is optimized for multichannel,
multimode receivers, which require the ADC to meet very
stringent dynamic performance requirements. With a
noise floor of -79.3dBFS, the MAX1427 allows for the
design of receivers with superior sensitivity.
The MAX1419 achieves two-tone, spurious-free dynamic
range (SFDR) of -91dBc for input tones of 10MHz and
15MHz. Its excellent signal-to-noise ratio (SNR) of 76.2dB
and single-tone SFDR performance (SFDR1/SFDR2) of
93.1dBc/95.5dBc at fIN = 15MHz and a sampling rate of
65Msps make this part ideal for high-performance digital
receivers.
The MAX1419 operates from an analog 5V and a digital
3V supply, features a 2.56VP-P full-scale input range,
and allows for a sampling speed of up to 65Msps. The
input T/H operates with a -1dB full-power bandwidth of
200MHz.
The MAX1419 features parallel, CMOS-compatible outputs
in two's-complement format. To enable the interface
with a wide range of logic devices, this ADC provides a
separate output driver power-supply range of 2.3V to
3.5V. The MAX1419 is manufactured in an 8mm x 8mm,
56-pin thin QFN package with exposed paddle (EP) for
low thermal resistance, and is specified for the extended
industrial (-40°C to +85°C) temperature range.
Note that IF parts MAX1418, MAX1428, and MAX1430
(see the Pin-Compatible Higher/Lower Speed Versions
Selection table in the full data sheet) are recommended for applications that require high dynamic performance for input frequencies
greater than fCLK/3. The MAX1419 is optimized for
input frequencies of less than fCLK/3.
Key Features
Applications/Uses
65Msps Minimum Sampling Rate
-79.3dBFS Noise Floor
Excellent Dynamic Performance
76.2dB SNR at fIN=15MHz and AIN = -1dBFS
93.1dBc/95.5dBc Single-Tone SFDR1/SFDR2 at fIN = 15MHz and AIN = -1dBFS
-91dBc Multitone SFDR at fIN1 = 10MHz and fIN2 = 15MHz
Less than 0.25ps Sampling Jitter
Fully Differential Analog Input Voltage Range of 2.56VP-P
CMOS-Compatible Two's-Complement Data Output
Separate Data Valid Clock and Overrange Outputs
Flexible-Input Clock Buffer
EV Kit Available for the MAX1419 (Order MAX1427EVKIT)
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-4
of
4
MAX1419
Free Sample
Buy
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX1419ETN-TD
Land Pattern: Not Available
-40°C to +85°C
See data sheet
MAX1419ETN+TD
Land Pattern: Not Available
-40°C to +85°C
See data sheet
MAX1419ETN-D
TQFN;56 pin;66 mm²
Outline Drawing: 21-0135 (PDF)
Land Pattern: 90-0046 (PDF)
Use pkgcode/variation: T5688-2*
Download
E-Mail