The DS1921G Thermochron® iButton® is a rugged, self-sufficient system that measures temperature and records the result in a protected memory section. The recording is done at a user-defined rate, both as a direct storage of temperature values as well as in the form of a histogram. Up to 2048 temperature values taken at equidistant intervals ranging from 1 to 255 minutes can be stored. The histogram provides 63 data bins with a resolution of 2.0°C. If the temperature leaves a user-programmable range, the DS1921G will also record when this happened, for how long the temperature stayed outside the permitted range, and if the temperature was too high or too low. An additional 512 bytes of read/write NV memory allow storing information pertaining to the object to which the DS1921G is associated. Data is transferred serially via the 1-Wire® protocol, which requires only a single data lead and a ground return. Every DS1921G is factory-lasered with a guaranteed unique electrically readable 64-bit registration number that allows for absolute traceability. The durable stainless steel package is highly resistant to environmental hazards such as dirt, moisture, and shock. Accessories permit the DS1921G to be mounted on almost any object, including containers, pallets, and bags.
Key Features
Digital thermometer measures temperature 0.5°C increments
Accuracy ±1°C from -30°C to +70°C. See EC table for accuracy specification
Built-in real-time clock (RTC) and timer has accuracy of ±2 minutes per month per month from 0°C to 45°C
Water resistant of waterproof if placed inside DS9107 iButton capsule (Exceeds Water Resistant 3 ATM requirements)
Automatically wakes up and measures temperature at user-programmable intervals from 1 to 255 minutes
Logs up to 2048 consecutive temperature measurements in protected nonvolatile (NV) random access memory
Records a long-term temperature histogram with 2.0°C resolution
Programmable temperature-high and temperature-low alarm trip points
Records up to 24 time stamps and durations when temperature leaves the range specified by the trip points
512 bytes of general-purpose read/write NV random access memory
Communicates to host with a single digital signal at 15.4kbits or 125kbits per second using 1-Wire protocol
Common iButton Features:
Digital identification and information by momentary contact
Unique, factory-lasered and tested 64-bit registration number (8-bit family code + 48-bit serial number + 8-bit CRC tester) assures absolute traceability because no two parts are alike
Multidrop controller for 1-Wire net
Chip-based data carrier compactly stores information
Data can be accessed while affixed to object
Button shape is self-aligning with cup-shaped probes
Durable stainless-steel case engraved with registration number withstands harsh environments
Easily affixed with self-stick adhesive backing, latched by its flange, or locked with a ring pressed onto its rim
Presence detector acknowledges when reader first applies voltage
Meets UL#913 (4th Edit.). Intrinsically Safe Apparatus: approved under Entity Concept for use in Class I, Division 1, Group A, B, C and D Locations
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-1
of
1
DS1921G
Free Sample
Buy
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
DS1921G-F5#
µCAN(F5);2 pin;0 mm²
Outline Drawing: 21-0266 (PDF)
Land Pattern: Not Available
Use pkgcode/variation: IB#5CP*
Download
E-Mail
