The MAX1272/MAX1273 multirange 12-bit data-acquisition systems (DAS) operate with a single 5V supply. The software-programmable analog input accepts a variety of voltage ranges: ±10V, ±5V, 0 to 10V, 0 to 5V for the MAX1272; ±VREF, ±VREF / 2, 0 to VREF, 0 to VREF / 2 for the MAX1273. The software-selectable extended analog input range increases the effective dynamic range to 14 bits and provides the flexibility to interface 4-20mA powered sensors directly to a single 5V system. In addition, the MAX1272 provides fault protection to ±12V. Other features include a 5MHz track/hold (T/H) bandwidth, 87ksps throughput rate, and internal (4.096V) or external (2.40V to 4.18V) reference.
The MAX1272/MAX1273 serial interfaces connect directly to SPI™/QSPI™/MICROWIRE™-compatible devices without any external logic.
Four software-programmable power-down modes (delayed standby, immediate standby, delayed full power-down, and immediate full power-down) provide low-current shutdown between conversions. In standby mode, the internal reference buffer remains active, thus eliminating startup delay.
The MAX1272/MAX1273 are available in an 8-pin PDIP package. Both devices are available in the commercial (0°C to +70°C) or extended (-40°C to +85°C) temperature range.
Key Features
Applications/Uses
Four Software-Selectable Input Ranges
MAX1272: 0 to 10V, 0 to 5V, ±10V, ±5V
MAX1273: 0 to VREF, 0 to VREF / 2, ±VREF, ±VREF / 2
12-Bit Resolution, No Missing Codes
5V Single-Supply Operation
SPI/QSPI/MICROWIRE-Compatible 3-Wire Interface
87ksps Sampling Rate
±12V Fault-Protected Analog Input (MAX1272)
Internal (4.096V) or External (2.4V to 4.18V) Reference
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Download
E-Mail
