The MAX2009 adjustable RF predistorter is designed to improve power amplifier (PA) adjacent-channel power rejection (ACPR) by introducing gain and phase expansion in a PA chain to compensate for the PA's gain and phase compression. With its +23dBm maximum input power level and wide adjustable range, the MAX2009 can provide up to 12dB of ACPR improvement for power amplifiers operating in the 1200MHz to 2500MHz frequency band. Lower frequencies of operation can be achieved with this IC's counterpart, the MAX2010.
The MAX2009 is unique in that it provides up to 7dB of gain expansion and 24° of phase expansion as the input power is increased. The amount of expansion is configurable through two independent sets of control: one set adjusts the gain expansion breakpoint and slope, while the second set controls the same parameters for phase. With these settings in place, the linearization circuit can be run in either a static set-and-forget mode, or a more sophisticated closed-loop implementation can be employed with real-time software-controlled distortion correction. Hybrid correction modes are also possible using simple lookup tables to compensate for factors such as PA temperature drift or PA loading.
The MAX2009 comes in a 28-pin thin QFN exposed pad (EP) package (5mm x 5mm) and is specified for the extended (-40°C to +85°C) temperature range.
Key Features
Applications/Uses
Up to 12dB ACPR Improvement*
Independent Gain and Phase Expansion Controls
Gain Expansion Up to 7dB
Phase Expansion Up to 24°
1200MHz to 2500MHz Frequency Range
Exceptional Gain and Phase Flatness
Group Delay < 1.3ns (Gain and Phase Sections Combined)
±0.04ns Group Delay Ripple Over a 100MHz Band
Capable of Handling Input Drives Up to +23dBm
On-Chip Temperature Variation Compensation
Single +5V Supply
Low Power Consumption: 75mW (typ)
Fully Integrated into Small 28-Pin Thin QFN Package
*Performance dependent on amplifier, bias, and modulation.
Digital Baseband Predistortion Architectures
Feed-Forward PA Architectures
Military Applications
WCDMA/UMTS, cdma2000®, DCS1800, and PCS1900 Base Stations
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-4
of
4
MAX2009
Free Sample
Buy
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX2009ETI-T
TQFN;28 pin;26 mm²
Outline Drawing: 21-0140 (PDF)
Land Pattern: 90-0023 (PDF)
Use pkgcode/variation: T2855-3*
Download
E-Mail