The MAX9712 mono class D audio power amplifier provides
class AB amplifier performance with class D efficiency,
conserving board space, and extending battery
life. Using a class D architecture, the MAX9712 delivers
up to 500mW into an 8Ω load while offering efficiencies
above 85%. A patented, low EMI modulation scheme
renders the traditional class D output filter unnecessary.
The MAX9712 offers two modulation schemes: a fixedfrequency
(FFM) mode, and a spread-spectrum (SSM)
mode that reduces EMI-radiated emissions due to the
modulation frequency. Furthermore, the MAX9712 oscillator
can be synchronized to an external clock through
the SYNC input, allowing the switching frequency to be
user defined. The SYNC input also allows multiple
MAX9712s to be cascaded and frequency locked, minimizing
interference due to clock intermodulation. The
device utilizes a fully differential architecture, a fullbridged
output, and comprehensive click-and-pop suppression.
The gain is internally set to +4V/V, further
reducing external component count.
The MAX9712 features high 72dB PSRR, a low 0.01%
THD+N, and SNR in excess of 90dB. Short-circuit and
thermal-overload protection prevent the device from
damage during a fault condition. The MAX9712 is available
in 10-pin TDFN (3mm x 3mm x 0.8mm), 10-pin
µMAX®, and 12-bump UCSP™ (1.5mm x 2mm x 0.6mm)
packages. The MAX9712 is specified over the extended
-40°C to +85°C temperature range.
Key Features
Applications/Uses
Filterless Amplifier Passes FCC Radiated
Emissions Standards with 100mm of Cable
Unique Spread-Spectrum Mode Offers 5dB
Emissions Improvement Over Conventional
Methods
Optional External SYNC Input
Simple Master-Slave Setup for Stereo Operation
85% Efficiency
Up to 500mW into 8Ω
Low 0.01% THD+N
High PSRR (72dB at 217Hz)
Integrated Click-and-Pop Suppression
Low Quiescent Current (4mA)
Low-Power Shutdown Mode (0.1µA)
Short-Circuit and Thermal-Overload Protection
Available in Thermally Efficient, Space-Saving
Packages
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
This product cannot be purchased through our web site. Contact factory for availability.
Download
E-Mail