The MAX1507/MAX1508 evaluation kit (EV kit) is a complete,
fully assembled, and tested circuit board that
demonstrates the MAX1507 linear battery charger for a
single-cell lithium-ion (Li+) battery. To evaluate the
MAX1508, U1 must be removed and replaced with a
MAX1508 device. The EV kit safely charges a single Li+
battery to 4.2V. The EV kit accepts a power-supply
input of 4.25V to 13V, but disables charging when the
input voltage exceeds 7V. Jumpers on the EV kit allow
adjustments to the die-temperature regulation levels
(MAX1507 only) and the ability to disable the charger.
An LED on the board indicates the status of the charging
cycle.
Key Features
Applications/Uses
Simple, Stand-Alone Li+ Charger
Safely Precharges Deeply Discharged Li+ Cells
4.25V to 13V Input Voltage Range
7V Overvoltage Protection Threshold
Resistor-Programmable Charge Current Up
to 0.8A
Charge Current Monitored by a Resistor
Programmable Die-Temperature Regulation Set
Points (MAX1507 Only)
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-1 of 1
MAX1507EVKIT
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX1507EVKIT
Active
Land Pattern: Not Available
See data sheet
Related Products
MAX1507 Linear Li+ Battery Charger with Integrated Pass FET and Thermal Regulation in 3mm x 3mm Thin DFN
Download
E-Mail