The DS3112RD is a reference design for the DS3112 DS3/E3 framer/mux and the DS3150 DS3/E3 LIU. Both devices are surface-mounted to minimize board size and to provide signal integrity. Interface to the DK101/DK2000 and included software give point-and-click access to configuration and status registers from a personal computer. LEDs on the board indicate loss-of-signal, transmit driver monitor, and PRBS sync status of the LIU. The board provides BNC connectors for an external clock, the line-side transmit and receive differential pairs, and a connector for data path interface. A PLD provides registered access to the LIU control pins along with control of clock and data paths.
Key Features
Soldered DS3150 and DS3112
BNC Connectors, Transformers, and Termination Passives for LIU
Careful Layout for Analog Signal Paths
DK2000 Interface Provides External Data Path
Memory-Mapped PLD for Control of DS3150
BNC Connectors for External Clock and Line-Side Interface
DK101/DK2000 Interface and Included Software Provide Point-and-Click Access the DS3112 Register Set
LEDs for Loss-of-Signal, Transmit Driver Monitor, and PRBS Sync
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
This product cannot be purchased through our web site. Contact factory for availability.
Download
E-Mail