The DSTINIm410 is a fully assembled and tested circuit board that evaluates the DS80C410 network microcontroller. In addition to the DS80C410, the DSTINIm410 includes a real-time clock, 1MB flash, 1MB static RAM, and support for an external Ethernet PHY for connecting to a wide variety of networks. The circuit board is designed as a module to be plugged into a 144-pin SODIMM connector. For evaluation, the DSTINIm410 can be inserted into the DSTINIs400 socket board. The combination of the two boards allows full evaluation of the features of the DS80C410 using an Ethernet network.
Detailed information about the initial setup process and use of the TINI platform is contained in Application Note 612: Getting Started with the
TINIm400 (DS80C400) Verification Module.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-2 of 2
DSTINIM410
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
DSTINIM410
Active
Land Pattern: Not Available
0°C to +70°C
See data sheet
DSTINIM410#
Active
MOD;* pin;0 mm²
Outline Drawing: (PDF)
Land Pattern: Not Available
Use pkgcode/variation: MDCT#5*
Download
E-Mail