ENGLISH 简体中文 日本語 한국어  

    Login | Register 


   
 
Enter keywords or part number



MAX1960, MAX1961, MAX1962
2.35V to 5.5V, 0.5% Accurate, 1MHz PWM Step-Down Controllers with Voltage Margining


  QuickView     Technical Documents     Ordering Info     More Information     User Comments (0)     All  
Status
Active: In Production.

Data Sheet
FULL DATA SHEET (PDF, 464kB)
Download this datasheet in PDF formatDownload   Send this datasheet to any email addressE-Mail


Description
The MAX1960/MAX1961/MAX1962 high-current, high-efficiency voltage-mode step-down DC-DC controllers operate from a 2.35V to 5.5V input and generate output voltages down to 0.8V at up to 20A. An on-chip charge pump generates a regulated 5V for MOSFET drive. Additionally, adaptive dead-time drivers allow a wide variety of MOSFETs to be used without risking shoot-through.

Fixed-frequency PWM operation and external synchronization make these controllers suitable for telecom and datacom applications. The operating frequency is programmable to either 500kHz or 1MHz, or from 450kHz to 1.2MHz with an external clock. A clock output is provided to synchronize another converter for 180° out-of-phase operation. A high closed-loop bandwidth provides excellent transient response for applications with dynamic loads.

Lossless current sensing in the MAX1960 and MAX1961 is achieved by monitoring the drain-to-source voltage of the low-side external FET. The current limit is scalable to accommodate a wide variety of MOSFETs and load currents. The MAX1962 has 10% accurate sense-resistor-based current limiting.

The MAX1960 and MAX1962 have an adjustable output voltage from 0.8V to 4.95V. The MAX1961 and MAX1962 have four preset output voltages (1.5V, 1.8V, 2.5V, and 3.3V) and feature 0.5% voltage accuracy over temperature, line, and load variations. The MAX1960 and MAX1961 also feature voltage-margining control inputs that shift the output voltage up or down by 4% for system testing.

An evaluation kit is available:  MAX1960EVKIT  

Key Features   Applications/Uses
  • 0.5% Accurate Output
  • Operates from 2.35V to 5.5V Supply
  • Generates Low Output Voltage Down to 0.8V
  • On-Chip Charge Pump Provides 5V Gate Drive
  • Ceramic or Electrolytic Capacitors
  • 94% Efficiency
  • External Synchronization from 450kHz to 1.2MHz
  • 500kHz/1MHz Fixed-Frequency PWM Operation
  • Fast Transient Response
  • Two Converters Can Operate 180° Out-of-Phase
  • ±4% Voltage Margining for System Test
  • 10% Accurate Current Sensing (MAX1962)
  • Adaptive Dead Time Prevents Shoot-Through
 
  • ASIC, FPGA, DSP, and CPU Core and I/O Voltages
  • Cellular Base Stations
  • Server and Storage Systems
  • Telecom and Network Equipment

Key Specifications:  Step-Down Switching Regulators
Part Number VIN
(V)
VIN
(V)
VOUT
(V)
VOUT
(V)
Preset VOUT
(V)
Max. IOUT
(A)
Max. IOUT
(A)
Output Adjust. Method DC-DC Outputs Oper. Freq.
(kHz)
Package/Pins Smallest Available Pckg.
(mm2)
Price
min max min max max w/pins See Notes
MAX1960  2.35 5.5 0.8 5 - 15 15 Resistor 1 1000
QSOP/20
54.2 $1.95 @1k
MAX1961  4.5
1.5
1.8
2.5
3.3
Preset
Resistor
QSOP/20
$2.05 @1k
MAX1962  4.5
1.5
1.8
2.5
3.3
Preset
Resistor
QSOP/20
$2.50 @1k
See All Step-Down Switching Regulators (264)

Diagram
MAX1960, MAX1961, MAX1962: Functional Diagram
Functional Diagram

Application Notes
  • Application Note 3443: Line and Load Transient Testing for Power Supplies - MAX1960
  • Application Note 3453: Testing a Power Supply for Line and Load Transients - MAX1960
  • Evaluation Kits
  • MAX1960EVKIT
  • Reliability Reports
  • Reliability Report: MAX1960.pdf MAX1961.pdf
  • Show FIT data for:
  • Request Reliability Report for:

    Software/Models
    none

    Ordering Information
    Notes:

    1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
    2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
    3. Part number suffixes: T or T&R = tape and reel;+ = RoHS/lead-free;# = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions.
    4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.


    Devices: 1-12 of 12

    MAX1960 Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX1960EEP    
    Active QSOP;20 pin;54.2 mm²
    Outline Drawing: 21-0055 (PDF)
    Land Pattern: 90-0168 (PDF)
    Use pkgcode/variation: E20-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX1960EEP-T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX1960EEP+  
    Active QSOP;20 pin;54.2 mm²
    Outline Drawing: 21-0055 (PDF)
    Land Pattern: 90-0168 (PDF)
    Use pkgcode/variation: E20+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX1960EEP+T    
    Active QSOP;20 pin;54.2 mm²
    Outline Drawing: 21-0055 (PDF)
    Land Pattern: 90-0168 (PDF)
    Use pkgcode/variation: E20+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX1961 Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX1961EEP+  
    Active QSOP;20 pin;54.2 mm²
    Outline Drawing: 21-0055 (PDF)
    Land Pattern: 90-0168 (PDF)
    Use pkgcode/variation: E20+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX1961EEP+T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX1961EEP  
    Active QSOP;20 pin;54.2 mm²
    Outline Drawing: 21-0055 (PDF)
    Land Pattern: 90-0168 (PDF)
    Use pkgcode/variation: E20-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX1961EEP-T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX1962 Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX1962EEP+  
    Active QSOP;20 pin;54.2 mm²
    Outline Drawing: 21-0055 (PDF)
    Land Pattern: 90-0168 (PDF)
    Use pkgcode/variation: E20+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX1962EEP+T    
    Active QSOP;20 pin;54.2 mm²
    Outline Drawing: 21-0055 (PDF)
    Land Pattern: 90-0168 (PDF)
    Use pkgcode/variation: E20+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX1962EEP  
    Active QSOP;20 pin;54.2 mm²
    Outline Drawing: 21-0055 (PDF)
    Land Pattern: 90-0168 (PDF)
    Use pkgcode/variation: E20-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX1962EEP-T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet

    Related Products

    More Like This: View Product Families for Similar Products

    Didn't Find What You Need?
  • Next Day Product Selection Assistance from Applications Engineers
  • Parametric Search
  • Applications Help
  •  QuickView   Technical Documents   Ordering Info   More Information  
     Description 
     Key Features 
     Applications/Uses 
     Key Specifications 
     Diagram 

     Data Sheet 
     Application Notes 
     Design Guides 
     Engineering Journals 
     Reliability Reports 
     Software/Models 
     Evaluation Kits 

     Price and Availability 
     Samples 
     Buy Online 
     Package Information 
     Lead-Free Information 

     Related Products 
     Notes and Comments 
     Evaluation Kits 

    Document Ref.: 19-2740; Rev 0; 2003-03-02
    This page last modified: 2009-10-13


            •         •         •     Privacy Policy     •     Legal Notices

        Copyright © 2010 by Maxim Integrated Products