The MAX8529 dual, synchronized, step-down controller
generates two outputs from input supplies ranging from
4.75V to 23V. Each output is adjustable from sub-1V
to 18V. Input voltage ripple and total RMS input ripple
current are reduced by synchronized 180-degree out-of-phase
operation.
The switching frequency is adjustable from 600kHz to
1.5MHz with an external resistor. Alternatively, the controller
can be synchronized to an external clock generated
to another MAX8529 or a system clock. One
MAX8529 can be set to generate an in-phase, or 90-degree out-of-phase, clock signal for synchronization with additional controllers. This allows two controllers to operate either as an interleaved two- or four-phase system
with each output shifted by 90 degrees. These
devices also feature soft-start and soft-stop.
The MAX8529 eliminates the need for current-sense
resistors by utilizing the low-side MOSFET's on-resistance
as a current-sense element. This protects the
DC-to-DC components from damage during output
overload conditions or when output short circuit faults
without requiring a current-sense resistor. Adjustable
foldback current limit reduces power dissipation during
short-circuit conditions. The MAX8529 includes a
power-on reset output to signal the system when both
outputs reach regulation.
The MAX8529 is available in a 24-pin QSOP package. An
evaluation kit is available to speed designs.
Key Features
Applications/Uses
Low Output Noise in DSL Band
Ceramic Input/Output Capacitors
Step-Down or Step-Up/Step-Down Operation
Four Output, 90-Degree Out-of-Phase Operation (Using Two MAX8529s)
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-4
of
4
MAX8529
Free Sample
Buy
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX8529EEG
QSOP;24 pin;
Dwg: 21-0055H (PDF)
Use pkgcode/variation: E24-1*
Download
E-Mail
