The MAX4004/MAX4006 precision, high-side, current monitors are specifically designed for monitoring photodiode current in fiber applications. They offer a connection point for the reference current and a monitor output that produces a signal proportional to the reference current. The monitor output of the MAX4004 is a current proportional to the reference current. The monitor output of the MAX4006 is a voltage proportional to the reference current. The current monitors have six decades of dynamic range and monitor reference current of 250nA to 2.5mA with better than 5% accuracy. The photodiode current can be monitored from 10nA to 10mA with reduced accuracy.
The MAX4004/MAX4006 accept a +2.7V to +22V supply voltage, suitable for PIN photodiode applications. (For higher voltage applications, refer to the MAX4007/MAX4008 data sheet.) Internal current limiting (20mA, typ) protects the device against short-circuit-to-ground or excessive current conditions. A clamp diode protects the monitor output from overvoltage. Additionally, these devices feature thermal shutdown if the die temperature reaches +150°C.
The MAX4004/MAX4006 are available in tiny, space-saving 6-pin SOT23 packages, and operate over the extended temperature range of -40°C to +85°C.
Key Features
Applications/Uses
Wide Reference Current Dynamic Range
Guaranteed 250nA to 2.5mA with 5% Accuracy
Extended 10nA to 10mA with 10% Monitor Accuracy
Current (MAX4004) or Voltage (MAX4006) Monitor Output
Reference Current-Limit Protection (20mA, typ)
Voltage Clamp Protects Subsequent Output Circuitry
+2.7V to +22V Wide Voltage Range Operation
6-Pin SOT23 Packages
Consumer Electronics
Current-to-Voltage Conversion
Laboratory Instrumentation
Level Translation
Medical Instrumentation
Photodiode Current-Monitoring Systems
Portable Instrumentation
Key Specifications: Fiber Photodiode Current Monitors
Download
E-Mail