The DS3154DK is an easy-to-use evaluation kit for the DS3154 quad DS3/E3/STS-1 LIU. A surface-mounted DS3154 and careful layout of the analog signal traces provide maximum signal integrity to demonstrate the transmit and receive capabilities of the DS3154. On-board Dallas 8051-compatible microcontroller and included software give point-and-click access to configuration and status registers from a personal computer. LEDs on the board indicate interrupt, loss-of-signal, transmit driver monitor, and PRBS sync status for all four ports. The board provides BNC connectors for the line-side transmit and receive differential pairs and a 50-pin connector for framer interface signals. All LEDs and connectors are clearly labeled with silk-screening to identify associated signals.
Key Features
Soldered DS3154 for Best Signal Integrity
BNC Connectors, Transformers and Termination Passives for All Four LIUs
Careful Layout for Analog Signal Paths
Equipment-Side Connector for External Data Source/Sink or External Remote Loopback
On-Board DS3 and E3 Crystal Oscillators
DS3154 Configured for CPU Bus Operation for Complete Control Over the Device
On-Board Dallas Microcontroller and Included Software Provide Point-and-Click Access to the DS3154 Register Set
LEDs for Interrupt, Loss-of-Signal, Transmit Driver Monitor, and PRBS Sync
Banana Jack Connectors for VDD and GND Support Use of Lab Power Supplies
Separate DS3154 VDD to Enable IDD Measurements
Easy-to-Read Silk Screen Labels Identify the Signals Associated with All Connectors, Jumpers and LEDs
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
Download
E-Mail
