QuickView - DS21349 3.3V T1/J1 Line Interface Unit


Enter keywords or part number

What's New

Products

Solutions

Maxim > Products > [Optoelectronics] [T/E Carrier and Packetized Communications]

DS21349 3.3V T1/J1 Line Interface Unit

QuickView Technical Documents Ordering Info More Information User Comments (0) All

Status

Active: In Production.

Description

FULL DATA SHEET (PDF, 668kB)

Download E-Mail

The DS21349 is a fully integrated LIU for long-haul or short-haul T1 applications over twisted-pair installations. It interfaces to two twisted-pair lines—one pair for transmit and one pair for receive through an appropriate network interface. The device can be configured for control through software or hardware mode. Software control is accomplished over a serial port, in hardware mode; individual pin settings allow standalone operation. The device provides a precise, crystal-less jitter attenuator that can be placed in either the transmit or receive path.

An evaluation kit is available: DS21349DK, DS2149DK

Key Features Applications/Uses

Fully integrated line interface unit (LIU)
Pin compatible with LevelOne LXT362
Supports both long haul and short haul
Crystal-less jitter attenuator
Jitter attenuator programmable for transmit or receive path
Meets ANSI T1.102, T1.403, T1.408, and AT&T 62411
Usable receive sensitivity of 0dB to -36dB that allows the device to operate on 0.63mm (22AWG) cables up to 6k feet in length
Five line buildout settings for short-haul applications
Four CSU filters from 0dB to -22.5dB
Transmit/receive performance monitors with driver-fail, monitor-open, and loss-of-signal outputs
Bipolar or NRZ interface
Programmable B8ZS encoder/decoder
QRSS generator/detector
Local, remote, and analog loopbacks
Generates and detects in-band loop-up and loop-down codes
Serial interface provides access to control registers

Channel Banks
Channel Service Units (CSUs)
Data Service Units (DSUs)
Muxes
Routers/Switches
Routers/Switches
T1/E1 Test Equipment