ENGLISH 简体中文 日本語 한국어  

    Login | Register 


   
 
Enter keywords or part number



DS3141, DS3142, DS3143, DS3144
Single/Dual/Triple/Quad DS3/E3 Framers

Industry's Smallest, Lowest Cost DS3/E3 Framers for Up to Four Separate Channels


  QuickView     Technical Documents     Ordering Info     More Information     User Comments (0)     All  
Status
Active: In Production.

Data Sheet
FULL DATA SHEET (PDF, 1.3MB)
Download this datasheet in PDF formatDownload   Send this datasheet to any email addressE-Mail


Errata
  • Errata DS3141 314XA1.pdf 
  • Errata DS3142 314XA1.pdf 
  • Errata DS3143 314XA1.pdf 
  • Errata DS3144 314XA1.pdf 
  • Description
    The DS3141/DS3142/DS3143/DS3144 devices include all necessary circuitry to frame and format up to four separate DS3 or E3 channels. Each framer in these devices is independently configurable to support M23 DS3, C-Bit Parity DS3, or G.751 E3. The framers interface to a variety of line interface units (LIUs), microprocessor buses, and other system components without glue logic. Each DS3/E3 framer has its own HDLC controller, FEAC controller, and BERT, as well as full support for error detection and generation, performance monitoring, and loopbacks.

    An evaluation kit is available:  DS3144DK  

    Key Features   Applications/Uses
    • One/two/three/four independent DS3/E3 framers on a single die
    • Framing and formatting to M23 DS3, C-bit parity DS3, and G.751 E3
    • LIU interface can be binary (NRZ) or dual-rail (POS/NEG)
    • B3ZS/HDB3 encoder and decoder
    • Generate and detect DS3/E3 alarms
    • Integrated HDLC controller for each channel
    • Integrated FEAC controller for each channel
    • Integrated bit error-rate tester (BERT) for each channel
    • Large performance-monitoring counters
    • Line, diagnostic, and payload loopbacks
    • Externally controlled transmit overhead insertion port
    • Support external timing or loop-timing
    • Framers can be powered down when not used
    • 8-bit processor port supports muxed or nonmuxed bus operation (Intel or Motorola)
    • 3.3V supply with 5V tolerant I/O
    • 144-pin 13mm x 13mm CSBGA package
    • IEEE 1149.1 JTAG support
    • Features continued on page 6 of the PDF data sheet
     

    Key Specifications:  T/E Carrier & Packetized Products
    Part Number Transmission Standard Functions Channels VSUPPLY
    (V)
    Package/Pins Smallest Available Pckg.
    (mm2)
    Price
    max w/pins See Notes
    DS3141  T3/E3 Framer 1 3.3
    TECSBGA/144
    169 $14.56 @1k
    DS3142  2
    TECSBGA/144
    $29.12 @1k
    DS3143  3
    TECSBGA/144
    $43.68 @1k
    DS3144  4
    TECSBGA/144
    $58.24 @1k
    See All T/E Carrier & Packetized Products (102)

    Diagram
    DS3141, DS3142, DS3143, DS3144: Functional Diagram
    Functional Diagram

    Application Notes
  • Application Note 3111: Interfacing the DS3144 Framer with the DS3154 LIU - DS3141, DS3142, DS3143, DS3144
  • Evaluation Kits
  • DS3144DK
  • Design Guides
  • Communications (PDF)
  • Reliability Reports
  • Reliability Report: DS3144.pdf
  • Request Reliability Report for:

    Software/Models
  • Request Driver Code
  • DS3141 IBIS Model
  • DS3141 BSDL Model
  • DS3142 IBIS Model
  • DS3142 BSDL Model
  • DS3143 IBIS Model
  • DS3143 BSDL Model
  • DS3144 Cadence Concept Symbol
  • DS3144 Cadence Allegro Symbol
  • DS3144 BSDL Model
  • DS3144 IBIS Model
  • DS3144 Logical Symbol-XML Format

    Ordering Information
    Notes:

    1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
    2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
    3. Part number suffixes: T or T&R = tape and reel;+ = RoHS/lead-free;# = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions.
    4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.


    Devices: 1-11 of 11

    DS3141 Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    DS3141    
    Active TECSBGA;144 pin;169 mm²
    Outline Drawing: 21-0314 (PDF)
    Land Pattern: 90-0270 (PDF)
    Use pkgcode/variation: X144T-1*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    DS3141N    
    Active TECSBGA;144 pin;169 mm²
    Outline Drawing: 21-0314 (PDF)
    Land Pattern: 90-0270 (PDF)
    Use pkgcode/variation: X144T-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    DS3141+  
    Active TECSBGA;144 pin;169 mm²
    Outline Drawing: 21-0314 (PDF)
    Land Pattern: 90-0270 (PDF)
    Use pkgcode/variation: X144T+1*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS3142 Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    DS3142    
    Active TECSBGA;144 pin;169 mm²
    Outline Drawing: 21-0314 (PDF)
    Land Pattern: 90-0270 (PDF)
    Use pkgcode/variation: X144T-1*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    DS3142N    
    Active TECSBGA;144 pin;169 mm²
    Outline Drawing: 21-0314 (PDF)
    Land Pattern: 90-0270 (PDF)
    Use pkgcode/variation: X144T-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    DS3142N+  
    Active TECSBGA;144 pin;169 mm²
    Outline Drawing: 21-0314 (PDF)
    Land Pattern: 90-0270 (PDF)
    Use pkgcode/variation: X144T+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS3142+  
    Active TECSBGA;144 pin;169 mm²
    Outline Drawing: 21-0314 (PDF)
    Land Pattern: 90-0270 (PDF)
    Use pkgcode/variation: X144T+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS3143 Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    DS3143    
    Active TECSBGA;144 pin;169 mm²
    Outline Drawing: 21-0314 (PDF)
    Land Pattern: 90-0270 (PDF)
    Use pkgcode/variation: X144T-1*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    DS3143N    
    Active TECSBGA;144 pin;169 mm²
    Outline Drawing: 21-0314 (PDF)
    Land Pattern: 90-0270 (PDF)
    Use pkgcode/variation: X144T-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    DS3144 Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    DS3144    
    Active TECSBGA;144 pin;169 mm²
    Outline Drawing: 21-0314 (PDF)
    Land Pattern: 90-0270 (PDF)
    Use pkgcode/variation: X144T-1*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    DS3144N    
    Active TECSBGA;144 pin;169 mm²
    Outline Drawing: 21-0314 (PDF)
    Land Pattern: 90-0270 (PDF)
    Use pkgcode/variation: X144T-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis

    More Information
  • New Product Press Release 2003-02-04 

    Related Products
    DS3112 TEMPE T3 E3 Multiplexer, 3.3V T3/E3 Framer and M13/E13/G.747 MUX
    DS3150 3.3V, DS3/E3/STS-1 Line Interface Unit
    DS3151, DS3152, DS3153, DS3154 Single/Dual/Triple/Quad DS3/E3/STS-1 LIUs

    Didn't Find What You Need?
  • Next Day Product Selection Assistance from Applications Engineers
  • Parametric Search
  • Applications Help
  •  QuickView   Technical Documents   Ordering Info   More Information  
     Description 
     Key Features 
     Applications/Uses 
     Key Specifications 
     Diagram 

     Data Sheet 
     Errata 
     Application Notes 
     Design Guides 
     Engineering Journals 
     Reliability Reports 
     Software/Models 
     Evaluation Kits 

     Price and Availability 
     Samples 
     Buy Online 
     Package Information 
     Lead-Free Information 

     Related Products 
     Notes and Comments 
     Evaluation Kits 

    2003-07-23
    This page last modified: 2009-10-14


            •         •         •     Privacy Policy     •     Legal Notices

        Copyright © 2010 by Maxim Integrated Products