The MAX5919A evaluation kit (EV kit) is a fully assembled and tested surface-mount dual hot-swap controller circuit board that provides current-limiting and VariableSpeed/BiLevel™ fault protection. The circuit uses a MAX5919A IC in a 16-pin QSOP package and is configurable for a 1.0V to 13.2V input range. The MAX5919A features autoretry and output undervoltage and overvoltage monitoring.
The EV kit is configured for 5V and 1.8V inputs. Both inputs are configured for up to 10A of output current. The MAX5919A controls two N-channel MOSFETs and provides current regulation during startup for both inputs. Several configurations allow the MAX5919A IC's unique current-regulation architecture to be tailored to the application. The current-limiting and short-circuit protection features are configurable and demonstrate the various features of the MAX5919A.
The EV kit features several configurations for the startup timer setting, current limit, and output voltage monitoring. The EV kit also provides independent turn-on delays for the outputs. The EV kit can also be used to evaluate other versions of the MAX5918 or MAX5919 after replacing the MAX5919A.
Key Features
Applications/Uses
Input Voltage:
5V, VIN1 (As Configured)
1.8V, VIN2 (As Configured)
Independent ON/OFF Control
Outputs Configured for 5V and 1.8V
(Configurable from 1.0V to 13.2V)
Configured to 10A Output Current Capability (Both Outputs)
25mV Current Threshold Trip (10A)
Demonstrates Unique Current Regulation Architecture
Configurable Startup Timer
Configurable Current Limits
Configurable Output Overvoltage and Undervoltage Monitoring (Both Outputs)
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
This product is not available for purchase.
Related Products
MAX5918, MAX5919 Low-Voltage, Dual Hot-Swap Controllers with Independent On/Off Control
Download
E-Mail