ENGLISH 简体中文 日本語 한국어  

    Login | Register 


   
 
Enter keywords or part number    



MAX6457, MAX6458, MAX6459, MAX6460
High-Voltage, Low-Current Voltage Monitors in SOT Packages


  QuickView     Technical Documents     Ordering Info     More Information     User Comments (0)     All  
Status
Active: In Production.

Description
FULL DATA SHEET (PDF, 176kB)
Download this datasheet in PDF formatDownload   Send this datasheet to any email addressE-Mail
The MAX6457–MAX6460 high supply voltage, low-power voltage monitors operate over a 4V to 28V supply voltage range. Each device includes a precision bandgap reference, one or two low-offset voltage comparators, internal threshold hysteresis, power-good or reset timeout options, and one or two high-voltage open-drain outputs. Two external resistors (three for window detection) set the trip threshold voltages.

The MAX6457 is a single voltage monitor for undervoltage or overvoltage detection. A logic-based clear input either latches the output for overvoltage applications or allows the device to operate in transparent mode. The MAX6458 includes two comparators (one overvoltage and one undervoltage) for window detection and a single output to indicate if the monitored input is within an adjustable voltage window. The MAX6459 includes dual overvoltage/undervoltage comparators with two independent comparator outputs. Use the MAX6459 as a window comparator with separate undervoltage and overvoltage outputs or as two independent, single voltage monitors. The MAX6460 includes a single comparator and an internal reference, and can also accept an external reference. The inverting and noninverting inputs of the comparator are externally accessible to support positive or negative voltage monitors and to configure the device for active-high or active-low output logic.

The MAX6457/MAX6458 offer fixed timing options as a voltage detector with a 50µs typical delay or as a reset circuit with a 90ms minimum reset timeout delay. The monitored input must be above the adjusted trip threshold (or within the adjusted voltage window for the MAX6458) for the selected timeout period before the output changes state. The MAX6459/MAX6460 offer only a fixed 50µs timeout period. Internal threshold hysteresis options (0.5%, 5%, and 8.3% for the MAX6457/MAX6458/MAX6459, and 0.5% for the MAX6460) reduce output chatter in noise-sensitive applications. Each device is available in a small SOT23 package and specified over the extended temperature range of -40°C to +125°C.

Key Features   Applications/Uses
  • Wide Supply Voltage Range, 4V to 28V
  • Internal 2.25V ±2.5% Reference
  • Low Current (3.5µA, typ at 12V)
  • Open-Drain n-Channel Output (28V Compliant)
  • Internal Threshold Hysteresis Options (0.5%, 5%, 8.3%)
  • Two IN-to-OUT Timeout Period Options (50µs, 150ms)
  • Internal Undervoltage Lockout
  • Immune to Short Voltage Transients
  • Small SOT23 Packages
  • Few External Components
  • Fully Specified from -40°C to +125°C

 
  • Automotive
  • Industrial
  • Multicell Battery-Stack Powered Equipment
  • Networking
  • Notebooks, eBooks
  • Overvoltage Monitoring/Protection
  • Telecom
  • Undervoltage Monitoring/Shutdown
  • Window Voltage Detection Circuitry

    Key Specifications:  Supervisors (1 Monitored Voltage)
    Part Number Reset Thresh.
    (V)
    Reset Out Reset Out tRESET Watchdog Feature Supervisor Features ICC
    (µA)
    Price
    Active Low Active High min max See Notes
    MAX6457 
    1.2 to 1.8
    1.8 to 2.5
    2.5 to 3.3
    3.3 to 5.5
    >=5.5
    Open Drain -
    85ms to 300ms
    <1ms
    No Watchdog
    High Voltage (>6V)
    Latched Output
    12.5 $1.20 @1k
    MAX6458  Open Drain -
    85ms to 300ms
    <1ms
    High Voltage (>6V)
    Latched Output
    Overvoltage/Window Monitor
    $1.36 @1k
    MAX6460  - Open Drain <1ms
    High Voltage (>6V)
    Overvoltage/Window Monitor
    $1.20 @1k
    See All Supervisors (1 Monitored Voltage) (274)

    Key Specifications:  Supervisors (2 Monitored Voltages)
    Part Number Interface Reset Thresh.
    (V)
    Reset Out tRESET Watchdog Feature Supervisor Features ICC
    (µA)
    Price
    Active Low min max See Notes
    MAX6459  R/C Adjustable
    1.2 to 1.8
    1.8 to 2.5
    2.5 to 3.3
    3.3 to 5.5
    >=5.5
    Open Drain <1ms No Watchdog
    Adjustable Reset Input
    High Voltage (>6V)
    Overvoltage/Window Monitor
    12.5 $1.50 @1k
    See All Supervisors (2 Monitored Voltages) (84)

    Diagram
    MAX6457, MAX6458, MAX6459, MAX6460: Typical Operating Circuit
    Typical Operating Circuit

    Didn't Find What You Need?
  • Next Day Product Selection Assistance from Applications Engineers
  • Parametric Search
  • Applications Help
  •  QuickView   Technical Documents   Ordering Info   More Information  
     Description 
     Key Features 
     Applications/Uses 
     Key Specifications 
     Diagram 

     Data Sheet 
     Application Notes 
     Design Guides 
     Engineering Journals 
     Reliability Reports 
     Software/Models 
     Evaluation Kits 

     Price and Availability 
     Samples 
     Buy Online 
     Package Information 
     Lead-Free Information 

     Related Products 
     Notes and Comments 
     Evaluation Kits 

    Document Ref.: 19-2534; Rev 4; 2009-04-02
    This page last modified: 2009-04-02


            •         •         •     Privacy Policy     •     Legal Notices

        Copyright © 2009 by Maxim Integrated Products