The MAX6439-MAX6442 are a family of ultra-low-power battery monitors with integrated microprocessor (µP) supervisors. The battery monitors are offered with single or dual low-battery output options that can be used to signal when the battery is OK (enabling full system operation), when the battery is low (for low-power system operation), and when the battery is dead (to disable system operation). These devices also have an independent µP supervisor that monitors VCC and provides an active-low reset output. A manual reset function is available to reset the µP with a push-button. No external components are required.
The MAX6439-MAX6442 are offered with several factory-trimmed low-battery threshold combinations ideal for single-cell lithium-ion (Li+) or multicell alkaline/NiCd/ NiMH applications. When the battery voltage drops below each specified low threshold, the low-battery outputs are asserted to alert the system. When the voltage rises above the specified high thresholds, the outputs are deasserted after a 150ms minimum timeout period, ensuring the voltages have stabilized before power circuitry is activated or providing microprocessor reset timing. The low and high thresholds provide hysteresis in battery-operated systems to eliminate output chattering.
The MAX6439/MAX6440 offer factory-trimmed battery monitors with a single output. The MAX6441/MAX6442 offer factory-trimmed battery monitors with dual outputs. All battery monitors have open-drain low-battery outputs.
The MAX6439-MAX6442 monitor system voltages (VCC) from 1.8V to 3.3V with seven fixed reset threshold options. Each device is offered with two minimum reset timeout periods of 150ms or 1200ms. The MAX6439/ MAX6441 are offered with an open-drain RESET-bar output and the MAX6440/MAX6442 are offered with a push-pull active-low RESET output.
The MAX6439-MAX6442 are offered in a SOT23 package and are fully specified over a -40°C to +85°C temperature range.
Key Features
Applications/Uses
Factory-Trimmed VBATT Threshold Options for Monitoring Single-Cell Li+ or Multicell Alkaline/NiCd/NiMH Applications
Immune to Short Battery Voltage Transients
Low Current (2.5µA typ at 3.6V)
Single and Dual Low-Battery Output Options
150ms Minimum LBO-bar Timeout Period
Independent µP Reset with Manual Reset
Factory-Set Reset Thresholds for Monitoring VCC from 1.8V to 3.3V
Available with 150ms (min) and 1.2s (min) VCC Reset Timeout Period Options
-40°C to +85°C Operating Temperature Range
Small 6- and 8-Pin SOT23 Packages
No External Components
Battery-Powered Systems (Single-Cell Li+ or Multicell NiMH, NiCd, Alkaline)
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Download
E-Mail