The MAX12558 is a dual 3.3V, 14-bit analog-to-digital
converter (ADC) featuring fully differential wideband
track-and-hold (T/H) inputs, driving internal quantizers.
The MAX12558 is optimized for low power, small size,
and high dynamic performance in intermediate frequency
(IF) and baseband sampling applications. This dual
ADC operates from a single 3.3V supply, consuming
only 756mW while delivering a typical 71.7dB signal-tonoise
ratio (SNR) performance at a 175MHz input frequency.
The T/H input stages accept single-ended or
differential inputs up to 400MHz. In addition to low operating
power, the MAX12558 features a 330µW powerdown
mode to conserve power during idle periods.
A flexible reference structure allows the MAX12558 to
use the internal 2.048V bandgap reference or accept
an externally applied reference and allows the reference
to be shared between the two ADCs. The reference
structure allows the full-scale analog input range
to be adjusted from ±0.35V to ±1.15V. The MAX12558
provides a common-mode reference to simplify design
and reduce external component count in differential
analog input circuits.
The MAX12558 supports either a single-ended or differential
input clock. User-selectable divide-by-two (DIV2)
and divide-by-four (DIV4) modes allow for design flexibility
and help to reduce the negative effects of clock jitter.
Wide variations in the clock duty cycle are compensated
with the ADC's internal duty-cycle equalizer (DCE).
The MAX12558 features two parallel, 14-bit-wide,
CMOS-compatible outputs. The digital output format is
pin-selectable to be either two's complement or Gray
code. A separate power-supply input for the digital outputs
accepts a 1.7V to 3.6V voltage for flexible interfacing
with various logic levels. The MAX12558 is available
in a 10mm x 10mm x 0.8mm, 68-pin thin QFN package
with exposed paddle (EP), and is specified for the
extended (-40°C to +85°C) temperature range.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-4
of
4
MAX12558
Free Sample
Buy
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX12558ETK+TD
-40°C to +85°C
See data sheet
MAX12558ETK-TD
-40°C to +85°C
See data sheet
MAX12558ETK+D
THIN QFN;68 pin;102 mm²
Dwg: 21-0142E (PDF)
Use pkgcode/variation: T6800+2*
Download
E-Mail