The MAX5040 evaluation kit (EV kit) is a complete, fully assembled and tested voltage-tracking controller circuit that demonstrates the capability of the MAX5040. The MAX5040 controls the output voltage of two power supplies, VI/O and VCORE, during power-up and power-down. The device ensures that the two supplies rise or fall at the same rate, limiting the voltage difference between them to under 200mV. The EV kit board comes with two step-down switching power supplies programmed to 3.3V and 1.8V output voltages that allow for an easy evaluation of the featured voltage-tracking controller. The EV kit board operates from a 5V supply capable of supplying up to 4A.
Key Features
On-Board Power Supplies Set at 3.3V and 1.8V
Voltage Tracking of Dual Power Supplies During Power-Up and Power-Down
Core Voltage Range Configurable from 0.8V to 4V
I/O Voltage Range Configurable from VCORE to 4V
Detects Short Circuit on VCORE and VI/O
Output Undervoltage Monitoring and Power-OK (POK) Status
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-1
of
1
MAX5040EVKIT
Free Sample
Buy
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX5040EVKIT
See data sheet
Related Products
MAX5039, MAX5040 Voltage-Tracking Controllers for PowerPC, DSPs, and ASICs
Download
E-Mail
