MAX1980 Quick-PWM Slave Controller with Driver Disable for Multiphase, DC-DC Converter

QuickView

Technical Documents

Ordering Info

More Information

All

Description

FULL DATA SHEET (PDF, 1.2MB)

Download

E-Mail

The MAX1980 step-down slave controller is intended for low-voltage, high-current, multiphase DC-DC applications. The MAX1980 slave controller can be combined with any of Maxim's Quick-PWM™ step-down controllers to form a multiphase DC-DC converter. Existing Quick-PWM controllers, such as the MAX1718, function as the master controller, providing accurate output-voltage regulation, fast transient response, and fault protection features. Synchronized to the master's low-side gate driver, the MAX1980 includes the Quick-PWM constant on-time controller, gate drivers for a synchronous rectifier, active current balancing, and precision current-limit circuitry.

The MAX1980 provides the same high-efficiency, ultra-low duty factor capability, and excellent transient response as other Quick-PWM controllers. The MAX1980 differentially senses the inductor currents of both the master and the slave across current-sense resistors. These differential inputs and the adjustable current-limit threshold derived from an external reference allow the slave controller to accurately balance the inductor currents and provide precise current-limit protection. The MAX1980's dual-purpose current-limit input also allows the slave controller to automatically enter a low-power standby mode when the master controller shuts down.

The MAX1980 features a driver-disable mode that forces both gate drivers (DL and DH) low. While the MAX1980's drivers are disabled, the master controller can operate in low-power skip mode, improving light-load efficiency. Additionally, the MAX1980 includes selectable trigger polarity, allowing the slave controller to trigger on the rising (out-of-phase) or falling (in-phase) edge of the master's low-side gate driver. Out-of-phase operation staggers the master and slave's on-times, reducing the input ripple current and consequently the number of input capacitors. The MAX1980 also features a selectable 200kHz/300kHz/550kHz switching frequency. The MAX1980 is available in compact 20-pin 5mm x 5mm QFN and thin QFN packages.

Key Features

Applications/Uses

Quick-PWM Slave Controller
Precise, Active Current Balance (±1.25mV )
Driver Disable Improves Light Load Efficiency
Accurate, Adjustable Current-Limit Threshold
Optimized for Low-Output Voltages (≤ 2V)
4V to 28V Battery Input Range
Selectable 200kHz/300kHz/550kHz Switching Frequency
Drive Large Synchronous-Rectifier MOSFETs
525µA (typ) I_CC Supply Current
20µA Standby Supply Current
Compact 20-Pin 5mm x 5mm QFN and Thin QFN Packages

	CPU Core Supplies
	Notebook Computers
	Servers/Desktop Computers
	Single-Stage (BATT to V_CORE) Converters
	Two-Stage (+5V to V_CORE) Converters

Key Specifications: Switch-Mode DC-DC Power Supplies

Part Number

Topology

V_IN (min) (V)

V_IN (max) (V)

Number of DC-DC Outputs

Digital/VID Programmed Output

Operating Current, I_CC (max) (mA)

Fixed Freq/PWM Operation

Operating Freq. (kHz)

Internal Power Switch(es)

Synchronous Rectifier

Package

Smallest Available Package (max w/pins) (mm²)

Price^**

MAX1980

Step-Down

0.8

Yes

200
300
550

Yes

QFN/20
THIN QFN/20

$2.47 @ 1k

See All Switch-Mode DC-DC Power Supplies (418)

Notes:
^**This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.