MAX1184 Dual 10-Bit, 20Msps, +3V, Low-Power ADC with Internal Reference and Parallel Outputs

QuickView

Technical Documents

Ordering Info

More Information

All

Description

FULL DATA SHEET (PDF, 340kB)

Download

E-Mail

The MAX1184 is a +3V, dual 10-bit analog-to-digital converter (ADC) featuring fully-differential wideband track-and-hold (T/H) inputs, driving two pipelined, 9-stage ADCs. The MAX1184 is optimized for low-power, high-dynamic performance applications in imaging, instrumentation, and digital communication applications. This ADC operates from a single +2.7V to +3.6V supply, consuming only 105mW while delivering a typical signal-to-noise ratio (SNR) of 59.5dB at an input frequency of 7.5MHz and a sampling rate of 20Msps. The T/H driven input stages incorporate 400MHz (-3dB) input amplifiers. The converters may also be operated with single-ended inputs. In addition to low operating power, the MAX1184 features a 2.8mA sleep mode as well as a 1µA power-down mode to conserve power during idle periods.

An internal +2.048V precision bandgap reference sets the full-scale range of the ADC. A flexible reference structure allows the use of the internal or an externally derived reference, if desired for applications requiring increased accuracy or a different input voltage range.

The MAX1184 features parallel, CMOS-compatible three-state outputs. The digital output format is set to two's complement or straight offset binary through a single control pin. The device provides for a separate output power supply of +1.7V to +3.6V for flexible interfacing. The MAX1184 is available in a 7mm x 7mm, 48-pin TQFP package, and is specified for the extended industrial (-40°C to +85°C) temperature range.

Pin-compatible higher speed versions of the MAX1184 are also available. Please refer to the MAX1180 data sheet for 105Msps, the MAX1181 data sheet for 80Msps, the MAX1182 data sheet for 65Msps, and the MAX1183 data sheet for 40Msps. In addition to these speed grades, this family includes a 20Msps multiplexed output version (MAX1185), for which digital data is presented time-interleaved on a single, parallel 10-bit output port.

Key Features

Applications/Uses

Single +3V Operation
Excellent Dynamic Performance:
- 59.5dB SNR at f_IN = 7.5MHz
- 74dB SFDR at f_IN = 7.5MHz
Low Power:
- 35mA (Normal Operation)
- 2.8mA (Sleep Mode)
- 1µA (Shutdown Mode)
0.02dB Gain and 0.25° Phase Matching (typ)
Wide ±1V_P-P Differential Analog Input Voltage Range
400MHz -3dB Input Bandwidth
On-Chip +2.048V Precision Bandgap Reference
User-Selectable Output Format—Two's Complement or Offset Binary
48-Pin TQFP Package with Exposed Pad for Improved Thermal Dissipation
Evaluation Kit Available

	High-Resolution Imaging
	I/Q Channel Digitization
	Instrumentation
	Multichannel IF Undersampling
	Video Application

Key Specifications: High-Speed ADCs (> 5Msps)

Part Number

Resolution (Bits)

Sample Rate (max) (Msps)

SFDR (dBc)

ENOB (bits)

SINAD (dB)

SNR (dB)

THD (db)

INL (±LSB)

DNL (±LSB)

Full-Power BW (MHz)

Data Bus Interface

Ref. (V)

Input Channels

Input Range (V)

Supply Voltage (V)

EV-Kit

RoHS Available

Package

Smallest Available Package (max w/pins) (mm²)

Operating Temp. Range (°C)

Price^**

MAX1184

9.57

59.4

59.5

-74

1.5

400

µP/10

Ext
Int +2.048

±1.024

2.5
3

Yes

TQFP/48

-40 to +85

$4.95 @ 1k

See All High-Speed ADCs (> 5Msps) (81)

Notes:
^**This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.