The MAX6391/MAX6392 microprocessor (µP) supervisory circuits provide sequenced logic reset outputs for multicomponent or dual-voltage systems. Each device can monitor two supply voltages and time-sequence two reset outputs to control the order in which system components are turned on and off. The MAX6391/MAX6392 increase system reliability and reduce circuit complexity and cost compared to separate ICs or discrete components.
The MAX6391/MAX6392 monitor VCC as the master reset supply. Both active-low RESET1 and active-low RESET2 are asserted whenever VCC drops below the selected factory-fixed reset threshold voltage. RESET1 remains asserted as long as VCC is below the threshold and deasserts 140ms (min) after VCC exceeds the thresholds.
RESET IN2 is monitored as the secondary reset supply and is adjustable with an external resistive-divider network. Active-low RESET2 is asserted whenever either VCC or RESET IN2 is below the selected thresholds. Active-low RESET2 remains asserted 140ms (min) or a capacitor-adjustable time period after VCC and RESET IN2 exceed their thresholds. RESET2 is always deasserted after active-low RESET1 during system power-up and is always asserted before active-low RESET1 during power-down.
The MAX6391 includes two internal pullup resistors for active-low RESET1 and active-low RESET2 (the open-drain outputs can be externally connected to the desired pullup voltages). The MAX6392 includes an active-low manual reset input (MR) that asserts both active-low RESET1 (push-pull) and RESET2 (open drain).
The MAX6391/MAX6392 are available in small 8-pin SOT23 packages and are specified over the -40°C to +85°C extended temperature range.
Key Features
Applications/Uses
Preset VCC Reset Threshold Voltages from 1.58V to 4.63V (master supply)
Customer-Adjustable RESET IN2 to Monitor Voltages Down to 625mV (secondary supply)
Fixed (140ms min) active-low RESET1 Timeout
Fixed (140ms min) or Customer-Adjustable active-low RESET2 Timeout Period
Guaranteed Reset Valid to VCC = 1V
Active-Low Open-Drain Outputs or Push-Pull/Open-Drain Combination
Internal Open-Drain Pullup Resistors (for external VOH voltage connections)
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-72 of 72
MAX6391
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX6391KA16
Active
SOT;8 pin;9 mm²
Outline Drawing: 21-0078 (PDF)
Land Pattern: 90-0176 (PDF)
Use pkgcode/variation: K8-5*
Download
E-Mail