The MAX1422 3.3V, 12-bit analog-to-digital converter
(ADC) features a fully differential input, pipelined, 12-
stage ADC architecture with wideband track-and-hold
(T/H) and digital error correction incorporating a fully-differential
signal path. The MAX1422 is optimized for lowpower,
high dynamic performance applications in
imaging and digital communications. The converter
operates from a single 3.3V supply, consuming only
137mW while delivering a 67dB (typ) signal-to-noise
ratio (SNR) at a 5MHz input frequency and a 20Msps
sampling frequency. The fully-differential input stage
has a small signal -3dB bandwidth of 400MHz and may
be operated with single-ended inputs.
An internal 2.048V precision bandgap reference sets
the ADCs full-scale range. A flexible reference structure
accommodates an internally or externally applied
buffered or unbuffered reference for applications
requiring increased accuracy or a different input voltage
range.
In addition to low operating power, the MAX1422 features
two power-down modes, a reference power-down, and a
shutdown mode. In reference power-down, the internal
bandgap reference is deactivated, resulting in a 2mA
(typ) supply current reduction. For idle periods, a full
shutdown mode is available to maximize power savings.
The MAX1422 provides parallel, offset binary, CMOS-compatible
three-state outputs.
The MAX1422 is available in a 7mm x 7mm x 1.4mm,
48-pin TQFP package and is specified over the commercial
(0°C to +70°C) and extended industrial (-40°C
to +85°C) temperature ranges.
Pin-compatible higher-speed versions of the MAX1422
are also available. Please refer to the MAX1421 data
sheet for 40Msps and the MAX1420 data sheet for
60Msps.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-8 of 8
MAX1422
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX1422CCM-D
Active
Land Pattern: Not Available
0°C to +70°C
See data sheet
MAX1422CCM-TD
Active
Land Pattern: Not Available
0°C to +70°C
See data sheet
MAX1422CCM+D
Active
Land Pattern: Not Available
0°C to +70°C
See data sheet
MAX1422CCM+TD
Active
Land Pattern: Not Available
0°C to +70°C
See data sheet
MAX1422ECM-D
Active
Land Pattern: Not Available
-40°C to +85°C
See data sheet
MAX1422ECM-TD
Active
Land Pattern: Not Available
-40°C to +85°C
See data sheet
MAX1422ECM+D
Active
LQFP;48 pin;83 mm²
Outline Drawing: 21-0054 (PDF)
Land Pattern: 90-0093 (PDF)
Use pkgcode/variation: C48+2*
Download
E-Mail