The MAX5015 evaluation kit (EV kit) is a fully assembled
and tested printed circuit board (PCB) that contains a
50W forward converter in the industry-standard half-brick
footprint. The circuit is configured for a +5.0V output
voltage and provides up to 10A of current. Power
for the circuit can be provided from either a +36V to
+72V or -36V to -72V DC source.
High efficiency of 86% is achieved at 5A using a single
transistor, forward converter topology providing output
power up to 50W. The surface-mount transformer provides
galvanic isolation and has a reset winding to
recover magnetic energy. Galvanic isolation up to
1500V is achieved by an optocoupler and surface-mount
transformer.
Operation at 280kHz allows the use of small magnetics
and output capacitors.
Warning: The MAX5015 EV kit is designed to operate
with high voltages. Dangerous voltages are present on
this EV kit and on equipment connected to it. Users who
power up this EV kit or power the sources connected to
it must be careful to follow safety procedures appropriate
to working with high-voltage electrical equipment.
Under severe fault or failure conditions, this EV kit may
dissipate large amounts of power, which could result in
the mechanical ejection of a component or of component
debris at high velocity. Operate this kit with care to
avoid possible personal injury.
Key Features
Applications/Uses
+36V to +72V or -36V to -72V Input Range
+5V Output at 10A
VOUT Regulation better than 0.1% over Line and Load
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-2 of 2
MAX5015EVKIT
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX5015EVKIT+
Active
Land Pattern: Not Available
See data sheet
MAX5015EVKIT
Active
Land Pattern: Not Available
See data sheet
Related Products
MAX5014, MAX5015 Current-Mode PWM Controllers with Integrated Startup Circuit for Isolated Power Supplies
Download
E-Mail