ENGLISH 简体中文 日本語 한국어  

DS9097U-009, DS9097U-E25, DS9097U-S09
Universal 1-Wire COM Port Adapter


  QuickView     Technical Documents     Ordering Info     More Information     All  
Data Sheet
FULL DATA SHEET (PDF, 120kB)
Download this datasheet in PDF formatDownload   Send this datasheet to any email addressE-Mail


Description
The DS9097U is a sophisticated RS232 to 1-Wire® adapter, which performs RS232 level conversion and actively generates the 1-Wire communication signals. Together with an adequate TMEX software driver, it enables an IBM®-compatible PC to directly communicate with any 1-Wire device connected to the adapter's RJ-11 port. The DB-9 version reads and writes any non-EPROM 1-Wire device. To write to EPROM devices, the DB-25 version with external power supply is required.

All DS9097U adapters are based on the DS2480B Serial 1-Wire Line Driver chip and therefore are not a plug-in replacement for the DS9097 or DS9097E. The RXD/TXD Polarity Select input of the DS2480B is tied to VDD (non-inverting). Free software drivers can be downloaded from http://www.ibutton.com/software/tmex/index.html.

The DS9097U communicates with 1-Wire devices at regular speed as well as Overdrive speed. The serial port must support a data transmission rate of 9600bps. Under software control, the adapter can be set up for RS232 data rates of 19200, 57600, and 115200bps. The two higher rates are recommended for communication at Overdrive speed with Overdrive capable devices. Since the DS9097U operates in a byte mode, every data byte received from the RS232 port generates eight time slots on the 1-Wire line. At 19200bps data rate the DS9097U-E25 is already faster than the DS9097 (E) at 115200bps.

Note that there are some COM ports that use signal levels of less than (±)5V. The DB-9 versions of this adapter will not work with such ports. The DS9097U-E25 adapter, however, will function in most cases if external power is supplied. Without EPROM programming, the external power may be anywhere in the range of 6V to 9V. For EPROM programming the voltage must be at 12V in any case. Before using an externally powered DS9097U-E25 with a COM port of less than (±)5V check whether the COM port will not be damaged by 5V on its RXD input.

Key Features
  • True-Ground Interface to an RS232 COM Port for Reading and Writing 1-Wire® Devices
  • Works with Bipolar as well as Unipolar Logic Signals
  • Compatible to COM port of (±)5V to (±)12V (DB-9 Version Only) or (±)6V to (±)12V (DB-25 Version)
  • Supports Reading and Writing at Regular and Overdrive Speeds
  • Provides Strong Pullup to 5V for Temperature-, Crypto-, and EEPROM 1-Wire devices
  • Programs 1-Wire EPROM Devices (DB-25 Version with External 12V Power Supply Only)
  • Communicates at Data Rates of 9.6 (default), 19.2, 57.6, and 115.2kbps
  • Standard DB-9 or DB-25 Female Connector and 6-lead RJ-11 Connector for Easy Attachment of Standard 1-Wire Cables and Probes
  • Includes DS2502 Identification Chip (DS9097U-009 only)

Key Specifications:   iButton Readers and Adapters
Part Number Overview Features RoHS Available Price**
DS9097U-009 
Universal Serial Port Adapter with ID
With ID
Yes $12.92 @ 1k
DS9097U-E25 
EPROM Programming, Universal Serial Port Adapter
EPROM Compatible Adapter
$22.98 @ 1k
DS9097U-S09 
Universal Serial Port Adapter w/o ID
 -  $12.69 @ 1k
See All iButton Readers and Adapters (25)
Notes:
**This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Diagram

Application Notes
  • Application Note 148: Guidelines for Reliable 1-Wire Networks - DS9097U-009, DS9097U-S09
  • Application Note 1097: White Paper 2: Using the 1-Wire® Public-Domain Kit - DS9097U-009, DS9097U-E25, DS9097U-S09
  • Application Note 3358: OneWireViewer User's Guide - DS9097U-009, DS9097U-E25, DS9097U-S09
  • Application Note 3808: What Is an iButton? - DS9097U-S09
  • Application Note 4206: Choosing the Right 1-Wire® Master for Embedded Applications - DS9097U

    Evaluation Kits
    none

    Design Guides
  • 1-Wire® PRODUCTS (PDF)

    Reliability Reports
  • Request Reliability Report for:

    Software/Models
    none

    Ordering Information
    Notes:

    1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
    2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
    3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions.
    4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.


    Devices: 1-6 of 6

    DS9097U-009 Notes Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    DS9097U-009#  
    IBACC;* pin;

    Use pkgcode/variation: IB#ACC*
    0°C to +70°C RoHS/Lead-Free: RoHS Qualified
    Materials Analysis
    DS9097U-009   With No.
    IBACC;* pin;

    Use pkgcode/variation: IB-ACC*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    DS9097U-E25 Notes Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    DS9097U-E25#  
    IBACC;* pin;

    Use pkgcode/variation: IB#ACC*
    0°C to +70°C RoHS/Lead-Free: RoHS Qualified
    Materials Analysis
    DS9097U-E25  
    IBACC;* pin;

    Use pkgcode/variation: IB-ACC*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    DS9097U-S09 Notes Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    DS9097U-S09#  
    IBACC;* pin;

    Use pkgcode/variation: IB#ACC*
    0°C to +70°C RoHS/Lead-Free: RoHS Qualified
    Materials Analysis
    DS9097U-S09   Without No.
    IBACC;* pin;

    Use pkgcode/variation: IB-ACC*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis

    Didn't Find What You Need?
  • Next Day Product Selection Assistance from Applications Engineers
  • Parametric Search
  • Applications Help
  •  QuickView   Technical Documents   Ordering Info   More Information  
     Description 
     Key Features 
     Applications/Uses 
     Key Specifications 
     Diagram 

     Data Sheet 
     Application Notes 
     Design Guides 
     Engineering Journals 
     Reliability Reports 
     Software/Models 
     Evaluation Kits 

     Price and Availability 
     Samples 
     Buy Online 
     Package Information 
     Lead-Free Information 

     Related Products 
     Notes and Comments 
     Evaluation Kits 

    2004-02-24
    This page last modified: 2007-06-25




             


          Privacy Policy    Legal Notices

          Copyright © 2008 by Maxim Integrated Products, Dallas Semiconductor


    ">