ENGLISH 简体中文 日本語 한국어  

DS2406
Dual Addressable Switch Plus 1kbit Memory


  QuickView     Technical Documents     Ordering Info     More Information     All  
Data Sheet
FULL DATA SHEET (PDF, 364kB)
Download this datasheet in PDF formatDownload   Send this datasheet to any email addressE-Mail


Description
The DS2406 Dual Addressable Switch Plus Memory offers a simple way to remotely control a pair of open drain transistors and to monitor the logic level at each transistor's output via the 1-Wire® bus for closed loop control. Each DS2406 has its own 64-bit ROM registration number that is factory lasered into the chip to provide a guaranteed unique identity for absolute traceability. The device's 1024 bits of EPROM can be used as electronic label to store information such as switch function, physical location, and installation date. Communication with the DS2406 follows the standard Dallas Semiconductor 1-Wire protocol and can be accomplished with minimal hardware such as a single port pin of a microcontroller. Multiple DS2406 devices can reside on a common 1-Wire network and be operated independently of each other. Individual devices will respond to a Conditional Search command if they qualify for certain user-specified conditions, which include the state of the output transistor, the static logic level or a voltage transition at the transistor's output.

Key Features   Applications/Uses
  • Open drain PIO pins are controlled and their logic level can be determined over 1-Wire bus for closed-loop control
  • Replaces and is fully compatible with DS2407 but no user-programmable power-on settings and no Hidden Mode
  • PIO channel A sink capability of 50mA at 0.4V with soft turn-on; channel B 8mA at 0.4V
  • Maximum operating voltage of 13V at PIO-A, 6.5V at PIO-B
  • 1024 bits user-programmable OTP EPROM
  • User-programmable status memory to control the device
  • Multiple DS2406's can be identified on a common 1-Wire bus and be turned on or off independently of other devices on the bus
  • Unique, factory-lasered and tested 64-bit registration number (8-bit family code + 48-bit serial number + 8-bit CRC tester) assures error-free selection and absolute identity because no two parts are alike
  • On-chip CRC16 generator allows detection of data transfer errors
  • Built-in multidrop controller ensures compatibility with other 1-Wire net products
  • Reduces control, address, data, programming and power to a single data pin
  • Directly connects to a single port pin of a microprocessor and communicates at up to 16.3 kbits/s
  • Supports Conditional Search with user-selectable condition
  • VCC bondout for optional external supply to the device (TSOC package only)
  • 1-Wire communication operates over a wide voltage range of 2.8V to 6.0V from -40°C to +85°C
  • Low cost TO-92, 6-pin TSOC and Flip Chip surface mount package

 
  • HVAC Systems
  • IEEE 1451.4 Sensor TEDS
  • Process Control
  • System Configuration & Monitoring

    Application Notes
  • Application Note 27: Understanding and Using Cyclic Redundancy Checks with Maxim iButton Products - DS2406
  • Application Note 114: 1-Wire File Structure - DS2406
  • Application Note 126: 1-Wire Communication Through Software - DS2406
  • Application Note 148: Guidelines for Reliable 1-Wire Networks - DS2406
  • Application Note 155: 1-Wire® Software Resource Guide Device Description - DS2406
  • Application Note 158: 1-Wire Tagging with XML - DS2406
  • Application Note 159: Ultra-Reliable 1-Wire Communications - DS2406
  • Application Note 177: Programming 1-Wire EPROM and EEPROM Memory Devices Using a PC - DS2406
  • Application Note 178: Printed Circuit Board Identification Using 1-Wire Products - DS2406
  • Application Note 187: 1-Wire Search Algorithm - DS2406
  • Application Note 192: Using the DS2480B Serial 1-Wire Line Driver - DS2406
  • Application Note 244: Advanced 1-Wire Network Driver - DS2406
  • Application Note 1097: White Paper 2: Using the 1-Wire Public-Domain Kit - DS2406
  • Application Note 1100: White Paper 5: Using 1-Wire APIs for Data Sheet Commands - DS2406
  • Application Note 3377: Maxim Wafer-Level Package Assembly Guide - DS2406
  • Application Note 3989: Add Control, Memory, Security, and Mixed-Signal Functions with a Single Contact - DS2406
  • Application Note 4002: Understanding Flip-Chip and Chip-Scale Package Technologies and Their Applications - DS2406

    Evaluation Kits
  • DS9090K

    Design Guides
  • 1-Wire® PRODUCTS (PDF)

    Reliability Reports
  • Reliability Report: DS2406.pdf

    Software/Models
    none

    Ordering Information
    Notes:

    1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
    2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
    3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions.
    4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.


    Devices: 1-8 of 8

    DS2406 Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    DS2406X  
    FCHIP;6 pin;6 mm²
    Dwg: 56-G7019-001A (PDF)
    Use pkgcode/variation: BF623-1*
    -40°C to +85°C See data sheet
    DS2406  
    TO92;3 pin;20 mm²
    Dwg: 56-G0006-001A (PDF)
    Use pkgcode/variation: Q3-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    DS2406+  
    TO92;3 pin;20 mm²
    Dwg: 56-G0006-001A (PDF)
    Use pkgcode/variation: Q3+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS2406+T&R  
    TO92;3 pin;20 mm²
    Dwg: 56-G0006-003A (PDF)
    Use pkgcode/variation: Q3+4*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS2406P  
    TSOC;6 pin;19 mm²
    Dwg: 56-G2016-001C1 (PDF)
    Use pkgcode/variation: D6-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    DS2406P/T&R  
    TSOC;6 pin;19 mm²
    Dwg: 56-G2016-001C1 (PDF)
    Use pkgcode/variation: D6-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    DS2406P+  
    TSOC;6 pin;19 mm²
    Dwg: 56-G2016-001C1 (PDF)
    Use pkgcode/variation: D6+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS2406P+T&R  
    TSOC;6 pin;19 mm²
    Dwg: 56-G2016-001C1 (PDF)
    Use pkgcode/variation: D6+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis

    Didn't Find What You Need?
  • Next Day Product Selection Assistance from Applications Engineers
  • Parametric Search
  • Applications Help
  •  QuickView   Technical Documents   Ordering Info   More Information  
     Description 
     Key Features 
     Applications/Uses 
     Key Specifications 
     Diagram 

     Data Sheet 
     Application Notes 
     Design Guides 
     Engineering Journals 
     Reliability Reports 
     Software/Models 
     Evaluation Kits 

     Price and Availability 
     Samples 
     Buy Online 
     Package Information 
     Lead-Free Information 

     Related Products 
     Notes and Comments 
     Evaluation Kits 

    2007-07-12
    This page last modified: 2008-03-06




             


          Privacy Policy    Legal Notices

          Copyright © 2008 by Maxim Integrated Products, Dallas Semiconductor


    ">