ENGLISH 简体中文 日本語 한국어  

DS21FF42, DS21FT42
4 x 4 16 Channel T1 Framer / 4 x 3 12 Channel T1 Framer


  QuickView     Technical Documents     Ordering Info     More Information     User Comments (0)     All  
Description
FULL DATA SHEET (PDF, 704kB)
Download this datasheet in PDF formatDownload   Send this datasheet to any email addressE-Mail


The 4 x 4 and 4 x 3 multichip modules (MCM) offer a high-density packaging arrangement for the DS21Q42 T1 Enhanced Quad Framer. Either three (DS21FT42) or four (DS21FF42) silicon die of these devices is packaged in an MCM with the electrical connections as shown in Figure 1-1.

All of the functions available on the DS21Q42 are also available in the MCM packaged version. However, in order to minimize package size, some signals have been deleted or combined. These differences are detailed in Table 1-1. In the 4 x 3 (FT) version, the fourth quad framer is not populated and hence all of the signals to and from this fourth framer are absent and should be treated as No Connects (NC). Table 2-1 lists all of the signals on the MCM and it also lists the absent signals for the 4 x 3.

The availability of both a 12-channel and a 16-channel version allow the maximum framer density with the lowest cost. For example, in a T3 application, two devices (one DS21FF42 and one DS21FT42) provide 28 framers without the additional cost and power consumption of any unused framers that appear in an octal approach.

Key Features   Applications/Uses
  • 16 or 12 completely independent T1 framers in one small 27mm x 27mm, 1.27mm pitch BGA package
  • Each multichip module (MCM) contains four (FF) or three (FT) DS21Q42 die
  • Each quad framer can be concatenated into a single 8.192MHz backplane data stream
  • IEEE 1149.1 JTAG-Boundary Scan Architecture
  • DS21FF42 and DS21FT42 are pin compatible with DS21FF44 and DS21FT44, respectively, to allow the same footprint to support T1 and E1 applications
  • 300-pin MCM 1.27mm pitch BGA package (27mm x 27mm)
  • Low-power 3.3V CMOS with 5V tolerant input and outputs

 
  • DSLAM
  • High-Density Line Cards
  • Multiplexers/Demultiplexers
  • Routers/Switches

    Key Specifications:   T/E Carrier & Packetized Products
    Part Number Transmission Standard Functions Number of Channels 5V-Tolerant I/O Supply Voltage (V) RoHS Available Package Price**
    DS21FF42  T1/J1
    Framer
    16 Yes 3.3 Yes BGA/300
    MCMBGA/300
    $120.00 @ 1k
    DS21FT42  12 No MCMBGA/300 $113.15 @ 1k
    See All T/E Carrier & Packetized Products (96)
    Notes:
    **This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

    Didn't Find What You Need?
  • Next Day Product Selection Assistance from Applications Engineers
  • Parametric Search
  • Applications Help
  •  QuickView   Technical Documents   Ordering Info   More Information  
     Description 
     Key Features 
     Applications/Uses 
     Key Specifications 
     Diagram 

     Data Sheet 
     Application Notes 
     Design Guides 
     Engineering Journals 
     Reliability Reports 
     Software/Models 
     Evaluation Kits 

     Price and Availability 
     Samples 
     Buy Online 
     Package Information 
     Lead-Free Information 

     Related Products 
     Notes and Comments 
     Evaluation Kits 

    2002-08-09
    This page last modified: 2007-06-21



          Privacy Policy    Legal Notices

          Copyright © 2008 by Maxim Integrated Products, Dallas Semiconductor