The DS21372 Bit Error Rate Tester (BERT) is a software-programmable test pattern generator, receiver,
and analyzer capable of meeting the most stringent error performance requirements of digital
transmission facilities. Two categories of test pattern generation (pseudorandom and repetitive)
conform to CCITT/ITU O.151, O.152, O.153, and O.161 standards. The DS21372 operates at clock rates
ranging from DC to 20MHz. This wide range of operating frequency allows the DS21372 to be used in
existing and future test equipment, transmission facilities, switching equipment, multiplexers, DACs,
routers, bridges, CSUs, DSUs, and CPE equipment.
The DS21372 user-programmable pattern registers provide the unique ability to generate loopback
patterns required for T1, Fractional-T1, Smart Jack, and other test procedures. Hence the DS21372 can
initiate the loopback, run the test, check for errors, and, finally, deactivate the loopback.
The DS21372 consists of four functional blocks: the pattern generator, pattern detector, error counter, and control interface. The DS21372 can be programmed to generate any pseudorandom pattern with length up to 232-1 bits (see table 5, note 9 in data sheet) or any user-programmable bit pattern from 1 to 32 bits in length. Logic inputs can be used to configure the DS21372 for applications requiring gap clocking such as Fractional-T1, Switched-56, DDS, normal framing requirements, and per-channel test procedures. In addition, the
DS21372 can insert single or 10-1 to 10-7 bit errors to verify equipment operation and connectivity.
Key Features
Generates/detects digital bit patterns for analyzing, evaluating, and troubleshooting digital communications systems
Operates at speeds from DC to 20MHz
Programmable polynomial length and feedback taps for generation of any other pseudorandom pattern up to 32 bits in length including: 26-1, 29-1, 211-1, 215-1, 220-1, 223-1, and 232-1
Programmable user-defined pattern and length for generation of any repetitive pattern up to 32 bits in length
Large 32-bit error count and bit count registers
Software-programmable bit-error insertion
Fully independent transmit and receive sections
8-bit parallel control port
Detects test patterns with bit error rates up to 10-2
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
Download
E-Mail