The DS21T05Z offers a power down input that disconnects the terminator resistors from the SCSI bus when not needed.This provides power saving when the termination is not required.
The DS2114 is designed to terminate cable assemblies and devices that do not require isolation from the SCSI bus. The small package integrates a voltage regulator and nine precisely trimmed 1100Ω resistors that actively terminate nine signal lines in compliance with SCSI-1, -2, and -3 standards.
SCSI termination is used wherever data must be transmitted without voltage drops caused by signal reflection at the parallel bus termination point, which is often significant in multidropped systems.
All Dallas terminators feature power-down mode with extremely low-quiescent consumption. Different SCSI terminators are available to match every existing SCSI protocol and to address different design concerns, such as price, board space, and voltage differential.
Key Features
Fully compliant with SCSI-1, 2, and 3
Actively terminates nine signal lines
Supports actively negated SCSI signals
Laser-trimmed 110Ω termination resistors with 2% tolerance
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Download
E-Mail