ENGLISH 简体中文 日本語 한국어  

    Login | Register 


   
 
Enter keywords or part number    



DS1350AB, DS1350Y
4096k Nonvolatile SRAM with Battery Monitor


  QuickView     Technical Documents     Ordering Info     More Information     User Comments (0)     All  
Status
Active: In Production.

Data Sheet
FULL DATA SHEET (PDF, 244kB)
Download this datasheet in PDF formatDownload   Send this datasheet to any email addressE-Mail


Description
The DS1350 4096k Nonvolatile (NV) SRAMs are 4,194,304 bit, fully static, NV SRAMs organized as 524,288 words by 8 bits. Each NV SRAM has a self-contained lithium energy source and control circuitry, which constantly monitors VCC for an out-of-tolerance condition. When such a condition occurs, the lithium energy source is automatically switched on and write protection is unconditionally enabled to prevent data corruption. Additionally, the DS1350 devices have dedicated circuitry for monitoring the status of VCC and the status of the internal lithium battery. DS1350 devices in the PowerCap Module package are directly surface mountable and are normally paired with a DS9034PC PowerCap to form a complete NV SRAM module. The devices can be used in place of 512k x 8 SRAM, EEPROM or Flash components.

Key Features
  • 10 years minimum data retention in the absence of external power
  • Data is automatically protected during power loss
  • Power supply monitor resets processor when VCC power loss occurs and holds processor in reset during VCC ramp-up
  • Battery monitor checks remaining capacity daily
  • Read and write access times as fast as 70ns
  • Unlimited write cycle endurance
  • Typical standby current 50µA
  • Upgrade for 512k x 8 SRAM, EEPROM or Flash
  • Lithium battery is electrically disconnected to retain freshness until power is applied for the first time
  • Full ±10% VCC operating range (DS1350Y) or optional ±5% VCC operating range (DS1350AB)
  • Optional industrial temperature range of -40°C to +85°C, designated IND
  • PowerCap Module (PCM) package
    • Directly surface-mountable module
    • Replaceable snap-on PowerCap provides lithium backup battery
    • Standardized pinout for all NV SRAM products
    • Detachment feature on PowerCap allows easy removal using a regular screwdriver
  • Underwriters Laboratories (UL®) Recognized

Diagram
DS1350AB, DS1350Y: Pin Assignment
Pin Assignment

Application Notes
  • Application Note 202: NV SRAM Frequently Asked Questions - DS1350AB, DS1350Y
  • Application Note 3254: Battery Monitoring in NV SRAM Modules - DS1350AB, DS1350Y
  • Application Note 3759: Timing Considerations When Using NVSRAM - DS1350AB, DS1350Y

    Reliability Reports
  • Request Reliability Report for:
  • Underwriters Laboratories (UL®) Recognized

    Software/Models
    none

    Ordering Information
    Notes:

    1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
    2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
    3. Part number suffixes: T or T&R = tape and reel;+ = RoHS/lead-free;# = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions.
    4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.


    Devices: 1-13 of 13

    DS1350AB Notes Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    DS1350ABP-100   5% Tolerance, 100ns  
    Active PCAP;34 pin;597 mm²
    Outline Drawing: 21-0246 (PDF)
    Land Pattern: Not Available
    Use pkgcode/variation: PC2-5*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    DS1350ABP-70   5% Tolerance, 70ns  
    Active PCAP;34 pin;597 mm²
    Outline Drawing: 21-0246 (PDF)
    Land Pattern: Not Available
    Use pkgcode/variation: PC2-5*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    DS1350ABP-100+    
    Active PCAP;34 pin;597 mm²
    Outline Drawing: 21-0246 (PDF)
    Land Pattern: Not Available
    Use pkgcode/variation: PC2+5*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1350ABP-70+  
    Active PCAP;34 pin;597 mm²
    Outline Drawing: 21-0246 (PDF)
    Land Pattern: Not Available
    Use pkgcode/variation: PC2+5*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1350ABP-70IND   5% Tolerance, 70ns  
    Active PCAP;34 pin;597 mm²
    Outline Drawing: 21-0246 (PDF)
    Land Pattern: Not Available
    Use pkgcode/variation: PC2-5*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    DS1350ABP-70IND+    
    Active PCAP;34 pin;597 mm²
    Outline Drawing: 21-0246 (PDF)
    Land Pattern: Not Available
    Use pkgcode/variation: PC2+5*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1350Y Notes Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    DS1350YP-C01    
    Active PCAP;34 pin;597 mm²
    Outline Drawing: 21-0246 (PDF)
    Land Pattern: Not Available
    Use pkgcode/variation: PC2+3*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1350YP-100   10% Tolerance, 100ns  
    Active PCAP;34 pin;597 mm²
    Outline Drawing: 21-0246 (PDF)
    Land Pattern: Not Available
    Use pkgcode/variation: PC2-5*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    DS1350YP-70   10% Tolerance, 70ns  
    Active PCAP;34 pin;597 mm²
    Outline Drawing: 21-0246 (PDF)
    Land Pattern: Not Available
    Use pkgcode/variation: PC2-5*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    DS1350YP-100+    
    Active PCAP;34 pin;597 mm²
    Outline Drawing: 21-0246 (PDF)
    Land Pattern: Not Available
    Use pkgcode/variation: PC2+5*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1350YP-70+  
    Active PCAP;34 pin;597 mm²
    Outline Drawing: 21-0246 (PDF)
    Land Pattern: Not Available
    Use pkgcode/variation: PC2+5*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1350YP-70IND   10% Tolerance, 70ns  
    Active PCAP;34 pin;597 mm²
    Outline Drawing: 21-0246 (PDF)
    Land Pattern: Not Available
    Use pkgcode/variation: PC2-5*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    DS1350YP-70IND+  
    Active PCAP;34 pin;597 mm²
    Outline Drawing: 21-0246 (PDF)
    Land Pattern: Not Available
    Use pkgcode/variation: PC2+5*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis

    Related Products

    More Like This: View Product Families for Similar Products

    Didn't Find What You Need?
  • Next Day Product Selection Assistance from Applications Engineers
  • Parametric Search
  • Applications Help
  •  QuickView   Technical Documents   Ordering Info   More Information  
     Description 
     Key Features 
     Applications/Uses 
     Key Specifications 
     Diagram 

     Data Sheet 
     Application Notes 
     Design Guides 
     Engineering Journals 
     Reliability Reports 
     Software/Models 
     Evaluation Kits 

     Price and Availability 
     Samples 
     Buy Online 
     Package Information 
     Lead-Free Information 

     Related Products 
     Notes and Comments 
     Evaluation Kits 

    2006-09-06
    This page last modified: 2009-10-28


            •         •         •     Privacy Policy     •     Legal Notices

        Copyright © 2009 by Maxim Integrated Products