The DS1306 serial alarm real-time clock (RTC) provides a full binary coded decimal (BCD) clock calendar that is accessed by a simple serial interface. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM indicator. In addition, 96 bytes of NV RAM are provided for data storage.
An interface logic-power supply input pin (VCCIF) allows the DS1306 to drive SDO and 32kHz pins to a level that is compatible with the interface logic. This allows an easy interface to 3V logic in mixed supply systems. The DS1306 offers dual-power supplies as well as a battery-input pin. The dual-power supplies support a programmable trickle charge circuit that allows a rechargeable energy source (such as a super cap or rechargeable battery) to be used for a backup supply. The VBAT pin allows the device to be backed up by a non-rechargeable battery. The DS1306 is fully operational from 2.0V to 5.5V.
Two programmable time-of-day alarms are provided by the DS1306. Each alarm can generate an interrupt on a programmable combination of seconds, minutes, hours, and day. "Don't care" states can be inserted into one or more fields if it is desired for them to be ignored for the alarm condition. A 1Hz and a 32kHz clock output are also available.
The DS1306 supports a direct interface to SPI™ serial data ports or standard 3-wire interface. An easy-to use address and data format is implemented in which data transfers can occur 1-byte at a time or in multiple-byte Burst Mode®.
Key Features
Real-time clock counts seconds, minutes, hours, date of the month, month, day of the week, and year with leap-year compensation valid up to 2100
96-byte nonvolatile RAM for data storage
Two time-of-day alarms—programmable on combination of seconds, minutes, hours, and day of the week
1Hz and 32.768kHz clock outputs
Serial interface supports Motorola serial peripheral interface (SPI) serial data ports or standard 3-wire interface
Burst mode for reading/writing successive addresses in clock/RAM
Dual-power supply pins for primary and backup power supplies
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-12
of
12
DS1306
Free Sample
Buy
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
DS1306
PDIP;16 pin;158 mm²
Dwg: 56-G5005-002A (PDF)
Use pkgcode/variation: P16-2*
DS1302 Trickle-Charge Timekeeping Chip DS1305 Serial Alarm Real-Time Clock MAX6902 SPI-Compatible RTC in a TDFN MAX6901 3-Wire Serial RTC in a TDFN DS1390, DS1391, DS1392, DS1393 Low-Voltage SPI/3-Wire RTCs with Trickle Charger
Download
E-Mail
