The DS1035 3-in-1 High-Speed Silicon Delay Line has three independent, buffered taps that reproduce logic inputs after delays ranging from 6ns to 30ns at each output. Nominal tolerance is ±1.5ns with additional tolerance of ±2.0ns over temperature and voltage for faster delays (see table). Both leading- and trailing-edge accuracy are specified. Each output can drive up to ten 74LS loads
The DS1035 is similar to the DS1033 but works with 5-volt systems. As a delay line, the DS1035 provides an effective, economical solution to the designer working with the complex timing requirements of mismatched ASICs or other components, or with the strict timing tolerances of increasing system clock rates. Besides fine-tuning system timing, the DS1035 can also function as a pulse width modulator or free-running oscillator. Innovative circuit designs and factory laser or EPROM trimming enhance accuracy without the need for external components, saving cost and space.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-27
of
27
DS1035
Free Sample
Buy
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
DS1035M-10
PDIP;8 pin;80 mm²
Dwg: 56-G5005-000A (PDF)
Use pkgcode/variation: P8-2*
Download
E-Mail