ENGLISH 简体中文 日本語 한국어  

MAX3514, MAX3516, MAX3517
Upstream CATV Amplifiers

Get Industry's Lowest-Power Consumption from New Cable Modem Upstream Amps


  QuickView     Technical Documents     Ordering Info     More Information     All  
Data Sheet
FULL DATA SHEET (PDF, 532kB)
Download this datasheet in PDF formatDownload   Send this datasheet to any email addressE-Mail


Description
The MAX3514/MAX3516/MAX3517 programmable-gain amplifiers are designed for use in CATV upstream applications. The MAX3514/MAX3517 drive up to +61dBmV (QPSK) into a 75Ω load when driven with a +34dBmV nominal input signal. The MAX3516 drives up to +64dBmV (QPSK). Both input and output ports are differential, requiring that an external balun be used at the output port. The variable gain feature provides greater than 56dB of dynamic range, which is controlled by an SPI™ 3-wire interface. Gain control is available in 0.5dB steps. The devices operate over a frequency range of 5MHz to 65MHz.

The MAX3514 is a pin-for-pin compatible upgrade for the MAX3510. Like the MAX3510, the MAX3514 is internally matched for use with a 2:1 (voltage ratio) balun. The MAX3517 utilizes an external output resistor for greater load-matching flexibility, and offers the same performance as the MAX3514. The MAX3516 is a higher power version of the MAX3514 with 3dB more gain and output power capability, and is offered in a smaller thermally enhanced TSSOP-EP package.

These devices operate from a single +5VDC supply and draw 120mA during transmit (100% duty cycle, +61dBmV out). The MAX3516 can be operated at up to +9VDC supply for improved harmonic distortion performance. The bias current is automatically adjusted based on the output level to increase efficiency. Additionally, the devices are shut off between bursts to minimize noise and save power while still maintaining a match at the output port. Shutdown mode disables all circuitry and reduces current consumption to 10µA (typ).

The MAX3514/MAX3517 are available in a 20-pin QSOP package and the MAX3516 is available in a 20-pin TSSOP-EP package. All devices operate in the extended industrial temperature range (-40°C to +85°C).

Key Features   Applications/Uses
  • Accurate Gain Control
  • Gain Programmable in 0.5dB Steps
  • 56dB of Gain Control Range
  • -55dBc Harmonic Distortion at 65MHz Input
  • Low Burst On/Off Transient
  • High Efficiency:
    • 35mA at +34dBmV Out
    • 8mA Transmit Disable Mode

 
  • CATV Status Monitors
  • DOCSIS®/EuroDOCSIS™ and DVB Cable Modems
  • OpenCable™ Set-Top Boxes
  • Telephony-Over-Cable

    Key Specifications:   CATV and Upstream Amplifiers
    Part Number Solutions Output Power (dBmV) Gain (dB) Features Supply Current (mA) RoHS Available Package Smallest Available Package (max w/pins) (mm2)
    MAX3514  Cable Modems 61 56
    -55dBc Harmonic Distortion at 65MHz Input
    35mA at +34dBmV Output
    8mA Transmit Disable Mode
    Gain Programmable in 0.5dB Steps
    Low-Burst On/Off Transient
    120 Yes QSOP/20 54
    MAX3516  64 59 160 TSSOP/20 43
    MAX3517  61 56 120 QSOP/20 54
    See All CATV and Upstream Amplifiers (10)

    Diagram
    MAX3514, MAX3516, MAX3517: Typical Operating Circuit
    Typical Operating Circuit

    Application Notes
  • Application Note 780: CATV Upstream Amplifier Selection Guide - MAX3516, MAX3514, MAX3517
  • Application Note 808: CATV dBm, dBmV, and dBµV Conversions - MAX3517, MAX3514, MAX3516
  • Application Note 888: REP033: MAX3516 Cable Upstream Amplifier Harmonic Distortion Measurements - MAX3516
  • Application Note 972: CATV Minimum Loss Pad for 75Ω Measurements - MAX3516, MAX3514
  • Application Note 1745: The MAX3510/MAX3514/MAX3516 Cable Upstream Amplifiers ACPR (Adjacent Channel Power Ratio) Performance - MAX3516, MAX3514
  • Application Note 1945: Performance of Maxim's Cable Upstream Amplifier Meets DOCSIS 2.0 Requirements - MAX3514, MAX3516
  • Application Note 2866: Converting S-Parameters from 50Ω to 75Ω Impedance - MAX3516, MAX3514, MAX3517

    Evaluation Kits
  • MAX3514EVKIT, MAX3516EVKIT, MAX3517EVKIT

    Design Guides
  • WIRELESS (PDF)

    Reliability Reports
  • Show FIT data for:
  • Request Reliability Report for:

    Software/Models
    none

    Ordering Information
    Notes:

    1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
    2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
    3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions.
    4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.


    Devices: 1-12 of 12

    MAX3514 Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX3514EEP  
    QSOP;20 pin;54 mm²
    Dwg: 21-0055G (PDF)
    Use pkgcode/variation: E20-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3514EEP+T  
    QSOP;20 pin;54 mm²
    Dwg: 21-0055G (PDF)
    Use pkgcode/variation: E20+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3514EEP+  
    QSOP;20 pin;54 mm²
    Dwg: 21-0055G (PDF)
    Use pkgcode/variation: E20+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3514EEP-T  
    QSOP;20 pin;54 mm²
    Dwg: 21-0055G (PDF)
    Use pkgcode/variation: E20-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3516 Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX3516EUP-T  
    TSSOP;20 pin;43 mm²
    Dwg: 21-0108F (PDF)
    Use pkgcode/variation: U20E-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3516EUP  
    TSSOP;20 pin;43 mm²
    Dwg: 21-0108F (PDF)
    Use pkgcode/variation: U20E-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3516EUP+  
    TSSOP;20 pin;43 mm²
    Dwg: 21-0108F (PDF)
    Use pkgcode/variation: U20E+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3516EUP+T  
    TSSOP;20 pin;43 mm²
    Dwg: 21-0108F (PDF)
    Use pkgcode/variation: U20E+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3517 Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX3517EEP  
    QSOP;20 pin;54 mm²
    Dwg: 21-0055G (PDF)
    Use pkgcode/variation: E20-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3517EEP-T  
    QSOP;20 pin;54 mm²
    Dwg: 21-0055G (PDF)
    Use pkgcode/variation: E20-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3517EEP+  
    QSOP;20 pin;54 mm²
    Dwg: 21-0055G (PDF)
    Use pkgcode/variation: E20+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3517EEP+T  
    QSOP;20 pin;54 mm²
    Dwg: 21-0055G (PDF)
    Use pkgcode/variation: E20+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis

    More Information
  • Product Ad: Download

    Related Products
    MAX3509 Upstream CATV Amplifier

    Didn't Find What You Need?
  • Next Day Product Selection Assistance from Applications Engineers
  • Parametric Search
  • Applications Help
  •  QuickView   Technical Documents   Ordering Info   More Information  
     Description 
     Key Features 
     Applications/Uses 
     Key Specifications 
     Diagram 

     Data Sheet 
     Application Notes 
     Design Guides 
     Engineering Journals 
     Reliability Reports 
     Software/Models 
     Evaluation Kits 

     Price and Availability 
     Samples 
     Buy Online 
     Package Information 
     Lead-Free Information 

     Related Products 
     Notes and Comments 
     Evaluation Kits 

    Document Ref.: 19-1826; Rev 4; 2006-10-25
    This page last modified: 2007-07-24



          Privacy Policy    Legal Notices

          Copyright © 2008 by Maxim Integrated Products, Dallas Semiconductor


    ">