The MAX1760/MAX1760H are high-efficiency, low-noise,
step-up DC-DC converters intended for use in battery-powered
wireless applications. They combine low quiescent
supply current (100µA) with a high 1MHz operating
frequency. Small external components and tiny 10-pin
TDFN and µMAX® packages make this device an excellent
choice for small hand-held applications. The
MAX1760 is activated by a logic-low active-low ON signal while the
MAX1760H is activated by a logic-high ON input.
Both devices use a synchronous-rectified pulse-width-modulation
(PWM) boost topology to generate 2.5V to
5.5V outputs from a wide range of inputs, such as 1 to 3
alkaline or NiCd/NiMH cells or a single lithium-ion (Li+)
cell. Proprietary Idle-Mode™ circuitry significantly
improves light-load efficiency and smoothly transitions to
fixed-frequency PWM operation at higher load currents.
Low-noise, forced-PWM mode is available for applications
requiring constant-frequency operation at all load
currents. PWM operation can also be synchronized to
an external clock to protect sensitive frequency bands
in communications equipment. Analog soft-start and
adjustable current limit permit optimization of efficiency,
external component size, and output voltage ripple.
Key Features
Applications/Uses
Up to 94% Efficiency
0.7V to 5.5V Input Range
Up to 800mA Output
Fixed 3.3V Output (or Adjustable from 2.5V to 5.5V)
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
Download
E-Mail
