The MAX3097E/MAX3098E feature three high-speed RS-485/RS-422 receivers with fault-detection circuitry and fault-status outputs. The receivers' inputs have fault thresholds that detect when the part is not in a valid state.
The MAX3097E/MAX3098E indicate when a receiver input is in an open-circuit condition, short-circuit condition, or outside the common-mode range. They also generate a fault indication when the differential input voltage goes below a preset threshold. See Ordering Information or the Electrical Characteristics for threshold values.
The fault circuitry includes a capacitor-programmable delay to ensure that there are no erroneous fault conditions even at slow edge rates. Each receiver is capable of accepting data at rates up to 32Mbps.
Key Features
Applications/Uses
Detects the Following RS-485 Faults:
Open-Circuit Condition
Short-Circuit Condition
Low Differential Voltage Signal
Common-Mode Range Violation
ESD Protection
±15kV—Human Body Model
±15kV—IEC 1000-4-2, Air-Gap Discharge Method
±8kV—IEC 1000-4-2, Contact Discharge Method
Single +3V to +5.5V Operation
-10V to +13.2V Extended Common-Mode Range
Capacitor-Programmable Delay of Fault Indication
Allows Error-Free Operation at Slow Data Rates
Independent and Universal Fault Outputs
32Mbps Data Rate
16-Pin QSOP is 40% Smaller than Industry-Standard 26LS31/32 Solutions
Embedded Systems
High-Speed, Triple RS-485/RS-422 Receiver with Extended Electrostatic Discharge (ESD)
RS-485/RS-422 Receivers for Motor-Shaft Encoders
Telecommunications
Triple RS-485/RS-422 Receiver with Input Fault Indication
Key Specifications:
RS-422/485 Line Driver/Receivers
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-56
of
56
MAX3097E
Free Sample
Buy
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX3097EEPE+
PDIP;16 pin;
Dwg: 21-0043D (PDF)
Use pkgcode/variation: P16+3*
Download
E-Mail
