QuickView

Technical Documents

Ordering Info

More Information

User Comments (0)

All

Status

Active: In Production.

Data Sheet

FULL DATA SHEET (PDF, 336kB) Download   E-Mail

Description

The MAX5180 contains two 10-bit, simultaneous-update, current-output digital-to-analog converters (DACs) designed for superior performance in communications systems requiring analog signal reconstruction with low distortion and low-power operation. The MAX5183 provides equal specifications, with on-chip precision resistors for voltage output operation. The devices are designed for 10pV-s glitch operation to minimize unwanted spurious signal components at the output. An on-board 1.2V bandgap circuit provides a well-regulated, low-noise reference that can be disabled for external reference operation. The MAX5180/MAX5183 are designed to provide a high level of signal integrity for the least amount of power dissipation. The DACs operate from a single supply of 2.7V to 3.3V. Additionally, these DACs have three modes of operation: normal, low-power standby, and complete shutdown, which provides the lowest possible power dissipation with 1µA (max) shutdown current. A fast wake-up time (0.5µs) from standby mode to full DAC operation conserves power by activating the DACs only when required. The MAX5180/MAX5183 are packaged in a 28-pin QSOP and are specified for the extended (-40°C to +85°C) temperature range. For lower-resolution, dual 8-bit versions, refer to the MAX5186/MAX5189 data sheet.

An evaluation kit is available:  MAX5183EVKIT  

Key Features		Applications/Uses
2.7V to 3.3V Single-Supply Operation Wide Spurious-Free Dynamic Range: 70dB at fOUT = 2.2MHz Fully Differential Outputs for Each DAC ±0.5% FSR Gain Mismatch ±0.2° Phase Mismatch Low-Current Standby or Full-Shutdown Modes Internal 1.2V Low-Noise Bandgap Reference Small 28-Pin QSOP Package		Arbitrary Waveform Generation (AWG) Digital Signal Processing (DSP) Imaging Signal Reconstruction of I and Q Transmit Signals

Diagram

Functional Diagram

Application Notes

Application Note 1737: MAX2510 I/Q Modulator Performance In The Presence of DC Offset Voltages - MAX5183 Application Note 1835: REP039: The MAX2510 IF Transceiver with the MAX5183 DAC - MAX5183

Evaluation Kits

MAX5183EVKIT

Design Guides

High-Speed ADCs, DACs, & AFEs (PDF)

Reliability Reports

Show FIT data for: MAX5180 MAX5183 Request Reliability Report for: MAX5180 MAX5183

Software/Models

none

Ordering Information

Notes: Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day. Part number suffixes: T or T&R = tape and reel;+ = RoHS/lead-free;# = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Devices: 1-8 of 8

MAX5180	Free Sample	Buy	Status	Package: TYPE PINS FOOTPRINT   DRAWING CODE/VAR *	Temp	RoHS/Lead-Free? Materials Analysis
MAX5180BEEI			Active	QSOP;28 pin;61.9 mm² Outline Drawing: 21-0055 (PDF) Land Pattern: 90-0173 (PDF) Use pkgcode/variation: E28-1*	-40°C to +85°C	RoHS/Lead-Free: No Materials Analysis
MAX5180BEEI-T			Active	QSOP;28 pin;61.9 mm² Outline Drawing: 21-0055 (PDF) Land Pattern: 90-0173 (PDF) Use pkgcode/variation: E28-1*	-40°C to +85°C	RoHS/Lead-Free: No Materials Analysis
MAX5180BEEI+			Active	QSOP;28 pin;61.9 mm² Outline Drawing: 21-0055 (PDF) Land Pattern: 90-0173 (PDF) Use pkgcode/variation: E28+1*	-40°C to +85°C	RoHS/Lead-Free: Lead Free Materials Analysis
MAX5180BEEI+T			Active	QSOP;28 pin;61.9 mm² Outline Drawing: 21-0055 (PDF) Land Pattern: 90-0173 (PDF) Use pkgcode/variation: E28+1*	-40°C to +85°C	RoHS/Lead-Free: Lead Free Materials Analysis
MAX5183	Free Sample	Buy	Status	Package: TYPE PINS FOOTPRINT   DRAWING CODE/VAR *	Temp	RoHS/Lead-Free? Materials Analysis
MAX5183BEEI			Active	QSOP;28 pin;61.9 mm² Outline Drawing: 21-0055 (PDF) Land Pattern: 90-0173 (PDF) Use pkgcode/variation: E28-1*	-40°C to +85°C	RoHS/Lead-Free: No Materials Analysis
MAX5183BEEI-T			Active	QSOP;28 pin;61.9 mm² Outline Drawing: 21-0055 (PDF) Land Pattern: 90-0173 (PDF) Use pkgcode/variation: E28-1*	-40°C to +85°C	RoHS/Lead-Free: No Materials Analysis
MAX5183BEEI+			Active	QSOP;28 pin;61.9 mm² Outline Drawing: 21-0055 (PDF) Land Pattern: 90-0173 (PDF) Use pkgcode/variation: E28+1*	-40°C to +85°C	RoHS/Lead-Free: Lead Free Materials Analysis
MAX5183BEEI+T			Active	QSOP;28 pin;61.9 mm² Outline Drawing: 21-0055 (PDF) Land Pattern: 90-0173 (PDF) Use pkgcode/variation: E28+1*	-40°C to +85°C	RoHS/Lead-Free: Lead Free Materials Analysis

More Information

New Product Press Release 1999-11-10

Related Products

MAX5186, MAX5189 Dual, 8-Bit, 40MHz, Current/Voltage, Simultaneous-Output DACs More Like This: View Product Families for Similar Products See All High-Speed DACs (43 Products)

Didn't Find What You Need?

Next Day Product Selection Assistance from Applications Engineers Parametric Search Applications Help

QuickView

Technical Documents

Ordering Info

More Information

Description   Key Features   Applications/Uses   Key Specifications   Diagram

Data Sheet   Application Notes   Design Guides   Engineering Journals   Reliability Reports   Software/Models   Evaluation Kits

Price and Availability   Samples   Buy Online   Package Information   Lead-Free Information

Related Products   Notes and Comments   Evaluation Kits