The MAX4680/MAX4690/MAX4700 dual analog switches feature low on-resistance of 1.25Ω max. On-resistance is matched between switches to 0.3Ω max and is flat (0.3Ω max) over the specified signal range. Each switch can handle Rail-to-Rail analog signals. Off-leakage current is only 5nA max at +85°C. These analog switches are ideal in low-distortion applications and are the preferred solution over mechanical relays in automatic test equipment or applications where current switching is required. They have low power requirements, require less board space, and are more reliable than mechanical relays.
The MAX4680 has two NC (normally closed) switches, and the MAX4690 has two NO (normally open) switches. The MAX4700 has one NC and one NO switch and features guaranteed break-before-make switching.
These devices operate from a +4.5V to +36V single supply or from ±4.5V to ±20V dual supplies. A separate logic supply pin guarantees TTL/CMOS-logic compatibility while operating across the entire supply voltage range.
Key Features
Applications/Uses
Low On-Resistance (1.25Ω max)
Guaranteed RON Match Between Channels (0.3Ω max)
Guaranteed RON Flatness Over Specified Signal Range (0.3Ω max)
Rail-to-Rail Signal Handling
Guaranteed Break-Before-Make (MAX4700)
+4.5V to +36V Single-Supply Operation
±4.5V to ±20V Dual-Supply Operation
TTL/CMOS-Compatible Control Inputs
> 2kV ESD Protection per Method 3015.7
Communication Systems
Data Acquisition
PBX/PABX Systems
Reed Relay Replacement
Sample-and-Hold Circuits
Test Equipment
Key Specifications: Switches and Multiplexers (Mid Voltage)
Download
E-Mail