ENGLISH 简体中文 日本語 한국어  

    Login | Register 


   
 
Enter keywords or part number    



MAX2235
+3.6V, 1W Autoramping Power Amplifier for 900MHz Applications


  QuickView     Technical Documents     Ordering Info     More Information     User Comments (0)     All  
Data Sheet
FULL DATA SHEET (PDF, 192kB)
Download this datasheet in PDF formatDownload   Send this datasheet to any email addressE-Mail


Description
The MAX2235 low-voltage, silicon RF power amplifier (PA) is designed for use in the 900MHz frequency band. It operates directly from a single +2.7V to +5.5V supply, making it suitable for use with 3-cell NiCd or 1-cell Li-Ion batteries. The device delivers +30dBm (1W) typical output power from a +3.6V supply or +28dBm from a +2.7V supply.

The MAX2235's gain is adjustable over a 37dB range. A power-control pin controls gain and bias to maintain optimum efficiency, even at lower output power levels, thus extending the operating life of the battery. At +30dBm output power, efficiency is typically 47%. An additional power-saving feature is a shutdown mode that typically reduces supply current below 1µA.

A key feature of this PA is its autoramping capability. During turn-on and turn-off periods, the RF envelope is controlled to approximate a raised cosine on the rising and falling edge, thereby minimizing transient noise and spectral splatter. The ramp time is set by selecting the value of an external capacitor.

The MAX2235 is intended for use in constant envelope applications such as AMPS, two-way paging, or FSK-based communications in the 900MHz ISM band. The device is available in a thermally enhanced 20-pin TSSOP package with a heat slug.

Key Features   Applications/Uses
  • 800MHz to 1000MHz Operation
  • High Output Power at 836MHz
    • +32.5dBm at +5.0V
    • +30dBm at +3.6V
    • +29dBm at +3.0V
    • +28dBm at +2.7V
  • +2.7V to +5.5V Single-Supply Operation
  • Automatic Power-Up/Power-Down Ramp
  • Direct On/Off Keying (OOK) without Intersymbol Interference or VCO Pulling
  • 37dB Power-Control Range
  • 47% Efficiency
  • <1µA Supply Current in Shutdown Mode
  • Small 20-Pin TSSOP Package with Heat Slug

 
  • 900MHz ISM-Band Applications
  • Analog Cellular Phones
  • Microcellular GSM (Power Class 5)
  • Two-Way Paging
  • Wireless Data Networks

    Key Specifications:   Power Amplifiers/Drivers
    Part Number Features Footprint (mm x mm) Package Price**
    MAX2235 
    +30dBm Output Power at +3.6V
    +32.5dBm Output Power at +5.0V
    37dB Power-Control Range
    47% Efficiency
    6.4 x 6.5 TSSOP-EP/20 $2.07 @ 1k
    See All Power Amplifiers/Drivers (9)
    Notes:
    **This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

    Diagram
    MAX2235: Typical Operating Circuit
    Typical Operating Circuit

    Application Notes
  • Application Note 1005: Ultra-Low Cost +30dBm PA for GSM and 900MHz-ISM Applications - MAX2235
  • Application Note 3702: MAX2235—Layout Optimization Techniques - max2235

    Evaluation Kits
  • MAX2235EVKIT

    Design Guides
  • Wireless (PDF)

    Reliability Reports
  • Reliability Report: MAX2235.pdf
  • Show FIT data for:

    Software/Models
    none

    Ordering Information
    Notes:

    1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
    2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
    3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions.
    4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.


    Devices: 1-4 of 4

    MAX2235 Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX2235EUP  
    TSSOP-EP;20 pin;43 mm²
    Outline Drawing: 21-0108 (PDF)
    Land Pattern: 90-0114 (PDF)
    Use pkgcode/variation: U20E-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX2235EUP-T  
    TSSOP-EP;20 pin;43 mm²
    Outline Drawing: 21-0108 (PDF)
    Land Pattern: 90-0114 (PDF)
    Use pkgcode/variation: U20E-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX2235EUP+  
    TSSOP-EP;20 pin;43 mm²
    Outline Drawing: 21-0108 (PDF)
    Land Pattern: 90-0114 (PDF)
    Use pkgcode/variation: U20E+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX2235EUP+T  
    TSSOP-EP;20 pin;43 mm²
    Outline Drawing: 21-0108 (PDF)
    Land Pattern: 90-0114 (PDF)
    Use pkgcode/variation: U20E+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis

    Notes and Comments
  • 1W autoramping power amplifier with gain control

    Didn't Find What You Need?
  • Next Day Product Selection Assistance from Applications Engineers
  • Parametric Search
  • Applications Help
  •  QuickView   Technical Documents   Ordering Info   More Information  
     Description 
     Key Features 
     Applications/Uses 
     Key Specifications 
     Diagram 

     Data Sheet 
     Application Notes 
     Design Guides 
     Engineering Journals 
     Reliability Reports 
     Software/Models 
     Evaluation Kits 

     Price and Availability 
     Samples 
     Buy Online 
     Package Information 
     Lead-Free Information 

     Related Products 
     Notes and Comments 
     Evaluation Kits 

    Document Ref.: 19-1463; Rev 2; 2001-09-10
    This page last modified: 2007-07-20


            •         •         •     Privacy Policy     •     Legal Notices

        Copyright © 2009 by Maxim Integrated Products