ENGLISH 简体中文 日本語 한국어  

    Login | Register 


   
 
Enter keywords or part number    



MAX4473
Low-Cost, Low-Voltage, PA Power Control Amplifier for GSM Applications


  QuickView     Technical Documents     Ordering Info     More Information     User Comments (0)     All  
Status
Active: In Production.

Data Sheet
FULL DATA SHEET (PDF, 208kB)
Download this datasheet in PDF formatDownload   Send this datasheet to any email addressE-Mail


Description
The MAX4473 PA power control IC is intended for closed-loop bias control of GSM power amplifiers. The device facilitates accurate control of the current delivered to the power amplifier (PA) through a control voltage. The error amplifier senses the voltage drop across an external current-sense resistor placed between the supply and the PA. The output of the error amplifier adjusts the PA gain until the current is proportional to the power control voltage applied to the MAX4473. This unique topology is useful in time-division-multiple-access (TDMA) systems, such as GSM, where accurate transmit burst shaping and power control is required. User-selectable current sensing and gain setting resistors maximize flexibility.

The MAX4473 operates from a single 2.7V to 6.5V supply and typically draws 1.2mA of supply current. The error amplifier has a common-mode range that extends from 1V to VCC. The power control input and error amplifier outputs swing rail-to-rail. A low-power shutdown mode reduces supply current to less than 1µA and activates an on-board active pull-down at the error amplifier output. Fast enable/disable times of 0.9µs reduce average power consumption without compromising dynamic performance. The MAX4473 is available in a space-saving 8-pin µMAX® package.

Key Features   Applications/Uses
  • Optimized for GSM Timing Requirements
  • 2.7V to 6.5V Single-Supply Operation
  • 1.2mA Supply Current
  • ≤ 1µA Supply Current in Shutdown Mode
  • Guaranteed 1.5µs Enable/Disable Times
  • Active Output Pull-Down in Shutdown Mode
  • Rail-to-Rail Error Amplifier Output
  • Rail-to-Rail Power Control Input
  • Output Drive Capability–500Ω and 300pF Loads
  • 1V to VCC Current Sense Input Common-Mode Voltage Range
  • No Phase-Reversal for Common-Mode Voltage from 0 to VCC
  • External Current Sensing and Gain Setting Resistors Maximize Flexibility
  • Available in a Space-Saving 8-Pin µMAX

 
  • Cordless Phones
  • GSM Cellular Phones
  • High-Frequency Servo Loops
  • Precision Current Control

    Diagram
    MAX4473: Typical Operating Circuit
    Typical Operating Circuit

    Application Notes
  • Application Note 1800: Smart IC Maintains Uniform Bias Current For GaAs MESFETs - MAX4473

    Design Guides
  • Amplifiers and Sensors (PDF)

    Reliability Reports
  • Show FIT data for:
  • Request Reliability Report for:

    Software/Models
  • MAX4473 Macromodel
  • MAX4473TST Test Circuit File

    Ordering Information
    Notes:

    1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
    2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
    3. Part number suffixes: T or T&R = tape and reel;+ = RoHS/lead-free;# = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions.
    4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.


    Devices: 1-6 of 6

    MAX4473 Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX4473ESA    
    Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-2*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX4473ESA-T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX4473EUA+  
    Active µMAX;8 pin;16 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX4473EUA+T    
    Active µMAX;8 pin;16 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX4473EUA    
    Active µMAX;8 pin;16 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX4473EUA-T    
    Active µMAX;8 pin;16 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis

    Didn't Find What You Need?
  • Next Day Product Selection Assistance from Applications Engineers
  • Parametric Search
  • Applications Help
  •  QuickView   Technical Documents   Ordering Info   More Information  
     Description 
     Key Features 
     Applications/Uses 
     Key Specifications 
     Diagram 

     Data Sheet 
     Application Notes 
     Design Guides 
     Engineering Journals 
     Reliability Reports 
     Software/Models 
     Evaluation Kits 

     Price and Availability 
     Samples 
     Buy Online 
     Package Information 
     Lead-Free Information 

     Related Products 
     Notes and Comments 
     Evaluation Kits 

    Document Ref.: 19-1448; Rev 4; 2008-12-10
    This page last modified: 2008-12-10


            •         •         •     Privacy Policy     •     Legal Notices

        Copyright © 2009 by Maxim Integrated Products