ENGLISH • 简体中文 • 日本語 • 한국어  

    Login | Register 


   
 
Enter keywords or part number    


What's New Products Solutions Design AppNotes Support Sales About Us Members

Maxim > Products > [Interface and Interconnect] 
MAX3080, MAX3081, MAX3082, MAX3083, MAX3084, MAX3085, MAX3086, MAX3087, MAX3088, MAX3089
Fail-Safe, High-Speed (10Mbps), Slew-Rate-Limited RS-485/RS-422 Transceivers


  QuickView     Technical Documents     Ordering Info     More Information     User Comments (0)     All  
Status
Active: In Production.

Data Sheet
FULL DATA SHEET (PDF, 632kB)
Download this datasheet in PDF formatDownload   Send this datasheet to any email addressE-Mail

Description
The MAX3080-MAX3089 high-speed transceivers for RS-485/RS-422 communication contain one driver and one receiver. These devices feature fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open or shorted. This means that the receiver output will be a logic high if all transmitters on a terminated bus are disabled (high impedance). The MAX3080/MAX3081/MAX3082 feature reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing error-free data transmission up to 115kbps. The MAX3083/MAX3084/MAX3085 offer higher driver output slew-rate limits, allowing transmit speeds up to 500kbps. The MAX3086/MAX3087/MAX3088's driver slew rates are not limited, making transmit speeds up to 10Mbps possible. The MAX3089's slew rate is selectable between 115kbps, 500kbps, and 10Mbps by driving a selector pin with a single three-state driver.

These transceivers typically draw 375µA of supply current when unloaded, or when fully loaded with the drivers disabled.

All devices have a 1/8-unit-load receiver input impedance that allows up to 256 transceivers on the bus. The MAX3082/MAX3085/MAX3088 are intended for halfduplex communications, while the MAX3080/MAX3081/ MAX3083/MAX3084/MAX3086/MAX3087 are intended for full-duplex communications. The MAX3089 is selectable between half-duplex and full-duplex operation. It also features independently programmable receiver and transmitter output phase via separate pins.

Key Features   Applications/Uses
  • For Fault-Tolerant Applications:
    MAX3430: ±80V Fault-Protected, Fail-Safe, 1/4- Unit Load, +3.3V RS-485 Transceiver
  • For Low-Voltage Applications:
    MAX3362: +3.3V, High-Speed, RS-485/RS-422 Transceiver in a SOT23 Package
  • For Multiple Transceiver Applications:
    MAX3030E-MAX3033E: ±15kV ESD-Protected, +3.3V, Quad, RS-422 Transmitters
    MAX3040-MAX3045: ±10kV ESD-Protected, Quad, +5V, RS-485/RS-422 Transmitters

 
  		• Industrial-Control Local Area Networks
  		• Level Translators
  		• RS-422/RS-485 Communications
  		• Transceivers for EMI-Sensitive Applications

    Key Specifications:  RS-422/485 Line Driver/Receivers
    Part Number Tx/Rx Duplex VSUPPLY
    (V)    		 ICC
    (mA)    		 Data Rate
    (kbps)    		 Tx EN Rx EN ICC (Shutdn.)
    (µA)    		 Rx/Tx on Bus Package/Pins Price
    typ min typ See Notes
    MAX3080  1Tx + 1Rx Full 5 0.375 115 Yes Yes 0.001 256
    PDIP(N)/14
    SOIC(N)/14
    		 $1.15 @1k
    MAX3081  Full 115 No No -
    PDIP(N)/8
    SOIC(N)/8
    		 $1.15 @1k
    MAX3082  Half 115 Yes Yes 0.001
    PDIP(N)/8
    SOIC(N)/8
    		 $1.15 @1k
    MAX3083  Full 500 Yes Yes 0.001
    PDIP(N)/14
    SOIC(N)/14
    		 $1.15 @1k
    MAX3084  Full 500 No No -
    PDIP(N)/8
    SOIC(N)/8
    		 $1.15 @1k
    MAX3085  Half 500 Yes Yes 0.001
    PDIP(N)/8
    SOIC(N)/8
    		 $1.15 @1k
    MAX3086  Full 10000 Yes Yes 0.001
    PDIP(N)/14
    SOIC(N)/14
    		 $1.15 @1k
    MAX3087  Full 10000 No No -
    PDIP(N)/8
    SOIC(N)/8
    		 $1.15 @1k
    MAX3088  Half 10000 Yes Yes 0.001
    PDIP(N)/8
    SOIC(N)/8
    		 $1.15 @1k
    MAX3089  Half/Full 10000 Yes Yes 0.001
    PDIP(N)/14
    SOIC(N)/14
    		 $1.15 @1k
    See All RS-422/485 Line Driver/Receivers (159)

    Diagram
    MAX3080, MAX3083, MAX3086: Pin Configuration
    Pin Configuration

    MAX3081, MAX3084, MAX3087: Pin Configuration
    Pin Configuration

    MAX3082, MAX3085, MAX3088: Pin Configuration
    Pin Configuration

    MAX3089: Pin Configuration
    Pin Configuration

    Application Notes
  		• Application Note 367: Explanation of Maxim RS-485 Features - MAX3080, MAX3089
  		• Application Note 639: Maxim Leads the Way in ESD Protection - MAX3080, MAX3083, MAX3088
  		• Application Note 651: ESD Protection for I/O Ports - MAX3080, MAX3083, MAX3088
  		• Application Note 1063: Microcontroller Recognizes Addresses in RS-485 Systems - MAX3088
  		• Application Note 1090: Methods for Trimming the Power Required in RS-485 Systems - MAX3080, MAX3088

    Design Guides
  		• Interface (PDF)
  		• Thermal Management (PDF)
  		• Low-Power Notebook ICs (PDF)

    Reliability Reports
  		• Reliability Report: MAX3085.pdf MAX3086.pdf MAX3087.pdf MAX3088.pdf MAX3089.pdf
  		• Show FIT data for:
  		• Request Reliability Report for:

    Software/Models
    none

    Ordering Information
    Notes:

    1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
    2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
    3. Part number suffixes: T or T&R = tape and reel;+ = RoHS/lead-free;# = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions.
    4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.


    Filter:
    Devices: 1-100 of 120
    1 2  --->

    MAX3080 Free
    Sample    		 Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    		Temp RoHS/Lead-Free?
    Materials Analysis
    MAX3080CPD    
    		Active PDIP(N);14 pin;158 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P14-4*
    		0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3080CPD+  
    		Active PDIP(N);14 pin;158 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P14+4*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3080EPD    
    		Active PDIP(N);14 pin;158 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P14-4*
    		-40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3080EPD+  
    		Active PDIP(N);14 pin;158 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P14+4*
    		-40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3080CSD    
    		Active SOIC(N);14 pin;54 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0112 (PDF)
    Use pkgcode/variation: S14-4*
    		0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3080CSD-T    
    		Active

    Land Pattern: Not Available

    		0°C to +70°C See data sheet
    MAX3080CSD+  
    		Active SOIC(N);14 pin;54 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0112 (PDF)
    Use pkgcode/variation: S14+4*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3080CSD+T    
    		Active SOIC(N);14 pin;54 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0112 (PDF)
    Use pkgcode/variation: S14+4*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3080ESD    
    		Active SOIC(N);14 pin;54 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0112 (PDF)
    Use pkgcode/variation: S14-4*
    		-40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3080ESD-T    
    		Active

    Land Pattern: Not Available

    		-40°C to +85°C See data sheet
    MAX3080ESD+  
    		Active SOIC(N);14 pin;54 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0112 (PDF)
    Use pkgcode/variation: S14+4*
    		-40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3080ESD+T    
    		Active SOIC(N);14 pin;54 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0112 (PDF)
    Use pkgcode/variation: S14+4*
    		-40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3081 Free
    Sample    		 Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    		Temp RoHS/Lead-Free?
    Materials Analysis
    MAX3081CPA    
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8-3*
    		0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3081CPA+  
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8+3*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3081EPA    
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8-3*
    		-40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3081EPA+  
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8+3*
    		-40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3081CSA    
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-5*
    		0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3081CSA-T    
    		Active

    Land Pattern: Not Available

    		0°C to +70°C See data sheet
    MAX3081CSA+  
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+5*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3081CSA+T    
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+5*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3081ESA    
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-5*
    		-40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3081ESA-T    
    		Active

    Land Pattern: Not Available

    		-40°C to +85°C See data sheet
    MAX3081ESA+  
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+5*
    		-40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3081ESA+T    
    		Active

    Land Pattern: Not Available

    		-40°C to +85°C See data sheet
    MAX3082 Free
    Sample    		 Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    		Temp RoHS/Lead-Free?
    Materials Analysis
    MAX3082CPA    
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8-3*
    		0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3082CPA+  
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8+3*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3082EPA    
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8-3*
    		-40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3082EPA+  
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8+3*
    		-40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3082CSA    
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-5*
    		0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3082CSA-T    
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-5*
    		0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3082CSA+  
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+5*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3082CSA+T    
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+5*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3082ESA    
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-5*
    		-40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3082ESA-T    
    		Active

    Land Pattern: Not Available

    		-40°C to +85°C See data sheet
    MAX3082ESA+  
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+5*
    		-40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3082ESA+T    
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+5*
    		-40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3083 Free
    Sample    		 Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    		Temp RoHS/Lead-Free?
    Materials Analysis
    MAX3083EPD+  
    		Active PDIP(N);14 pin;158 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P14+4*
    		-40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3083CPD+  
    		Active PDIP(N);14 pin;158 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P14+4*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3083CPD    
    		Active PDIP(N);14 pin;158 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P14-4*
    		0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3083EPD    
    		Active PDIP(N);14 pin;158 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P14-4*
    		-40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3083CSD    
    		Active SOIC(N);14 pin;54 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0112 (PDF)
    Use pkgcode/variation: S14-4*
    		0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3083CSD-T    
    		Active

    Land Pattern: Not Available

    		0°C to +70°C See data sheet
    MAX3083CSD+  
    		Active SOIC(N);14 pin;54 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0112 (PDF)
    Use pkgcode/variation: S14+4*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3083CSD+T    
    		Active SOIC(N);14 pin;54 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0112 (PDF)
    Use pkgcode/variation: S14+4*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3083ESD    
    		Active SOIC(N);14 pin;54 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0112 (PDF)
    Use pkgcode/variation: S14-4*
    		-40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3083ESD-T    
    		Active

    Land Pattern: Not Available

    		-40°C to +85°C See data sheet
    MAX3083ESD+  
    		Active SOIC(N);14 pin;54 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0112 (PDF)
    Use pkgcode/variation: S14+4*
    		-40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3083ESD+T    
    		Active

    Land Pattern: Not Available

    		-40°C to +85°C See data sheet
    MAX3084 Free
    Sample    		 Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    		Temp RoHS/Lead-Free?
    Materials Analysis
    MAX3084CPA    
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8-3*
    		0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3084CPA+  
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8+3*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3084EPA    
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8-3*
    		-40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3084EPA+  
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8+3*
    		-40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3084CSA    
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-5*
    		0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3084CSA-T    
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-5*
    		0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3084CSA+  
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+5*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3084CSA+T    
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+5*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3084ESA    
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-5*
    		-40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3084ESA-T    
    		Active

    Land Pattern: Not Available

    		-40°C to +85°C See data sheet
    MAX3084ESA+  
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+5*
    		-40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3084ESA+T    
    		Active

    Land Pattern: Not Available

    		-40°C to +85°C See data sheet
    MAX3085 Free
    Sample    		 Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    		Temp RoHS/Lead-Free?
    Materials Analysis
    MAX3085CPA    
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8-3*
    		0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3085CPA+  
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8+3*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3085EPA    
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8-3*
    		-40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3085EPA+  
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8+3*
    		-40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3085CSA    
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-5*
    		0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3085CSA-T    
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-5*
    		0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3085CSA+  
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+5*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3085CSA+T    
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+5*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3085ESA    
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-5*
    		-40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3085ESA-T    
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-5*
    		-40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3085ESA+  
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+5*
    		-40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3085ESA+T    
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+5*
    		-40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3086 Free
    Sample    		 Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    		Temp RoHS/Lead-Free?
    Materials Analysis
    MAX3086CPD+  
    		Active PDIP(N);14 pin;158 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P14+4*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3086EPD+  
    		Active PDIP(N);14 pin;158 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P14+4*
    		-40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3086CPD    
    		Active PDIP(N);14 pin;158 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P14-4*
    		0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3086EPD    
    		Active PDIP(N);14 pin;158 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P14-4*
    		-40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3086CSD    
    		Active SOIC(N);14 pin;54 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0112 (PDF)
    Use pkgcode/variation: S14-4*
    		0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3086CSD-T    
    		Active

    Land Pattern: Not Available

    		0°C to +70°C See data sheet
    MAX3086CSD+  
    		Active SOIC(N);14 pin;54 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0112 (PDF)
    Use pkgcode/variation: S14+4*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3086CSD+T    
    		Active SOIC(N);14 pin;54 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0112 (PDF)
    Use pkgcode/variation: S14+4*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3086ESD    
    		Active SOIC(N);14 pin;54 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0112 (PDF)
    Use pkgcode/variation: S14-4*
    		-40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3086ESD-T    
    		Active SOIC(N);14 pin;54 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0112 (PDF)
    Use pkgcode/variation: S14-4*
    		-40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3086ESD+  
    		Active SOIC(N);14 pin;54 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0112 (PDF)
    Use pkgcode/variation: S14+4*
    		-40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3086ESD+T    
    		Active SOIC(N);14 pin;54 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0112 (PDF)
    Use pkgcode/variation: S14+4*
    		-40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3087 Free
    Sample    		 Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    		Temp RoHS/Lead-Free?
    Materials Analysis
    MAX3087CPA    
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8-3*
    		0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3087CPA+  
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8+3*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3087EPA    
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8-3*
    		-40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3087EPA+  
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8+3*
    		-40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3087CSA    
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-5*
    		0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3087CSA-T    
    		Active

    Land Pattern: Not Available

    		0°C to +70°C See data sheet
    MAX3087CSA+  
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+5*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3087CSA+T    
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+5*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3087ESA    
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-5*
    		-40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3087ESA-T    
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-5*
    		-40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3087ESA+  
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+5*
    		-40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3087ESA+T    
    		Active SOIC(N);8 pin;31 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+5*
    		-40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3088 Free
    Sample    		 Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    		Temp RoHS/Lead-Free?
    Materials Analysis
    MAX3088CPA    
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8-3*
    		0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3088CPA+  
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8+3*
    		0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3088EPA    
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8-3*
    		-40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX3088EPA+  
    		Active PDIP(N);8 pin;82 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8+3*
    		-40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    Filter:
    Devices: 1-100 of 120
    1 2  --->


    Notes and Comments
    • Industry-standard pinout: 75180 (MAX3080)
    • Industry-standard pinout: 75179 (MAX3081)
    • Industry-standard pinout: 75176 (MAX3082)
    • Industry-standard pinout: 75180 (MAX3083)
    • Industry-standard pinout: 75179 (MAX3084)
    • Industry-standard pinout: 75176 (MAX3085)
    • Industry-standard pinout: 75180 (MAX3086)
    • Industry-standard pinout: 75179 (MAX3087)
    • Industry-standard pinout: 75176 (MAX3088)
    • Industry-standard pinout: 75180 (MAX3089)

    More Information
  		• RS485 Resources

    Related Products

    More Like This: View Product Families for Similar Products

    Didn't Find What You Need?
  • Next Day Product Selection Assistance from Applications Engineers
  • Parametric Search
  • Applications Help

    •  QuickView   Technical Documents   Ordering Info   More Information  
     Description 
     Key Features 
     Applications/Uses 
     Key Specifications 
     Diagram 

    		 Data Sheet 
     Application Notes 
     Design Guides 
     Engineering Journals 
     Reliability Reports 
     Software/Models 
     Evaluation Kits 

    		 Price and Availability 
     Samples 
     Buy Online 
     Package Information 
     Lead-Free Information 

    		 Related Products 
     Notes and Comments 
     Evaluation Kits 

    Document Ref.: 19-1138; Rev 2; 2004-03-11
    This page last modified: 2009-11-06


            •         •         •     Privacy Policy     •     Legal Notices

        Copyright © 2009 by Maxim Integrated Products