ENGLISH 简体中文 日本語 한국어  

    Login | Register 


   
 
Enter keywords or part number    



MAX706AP, MAX706AR, MAX706AS, MAX706AT, MAX706P, MAX706R, MAX706S, MAX706T, MAX708R, MAX708S, MAX708T
+3V Voltage Monitoring, Low-Cost, µP Supervisory Circuits


  QuickView     Technical Documents     Ordering Info     More Information     User Comments (0)     All  
Status
Active: In Production.

Data Sheet
FULL DATA SHEET (PDF, 472kB)
Download this datasheet in PDF formatDownload   Send this datasheet to any email addressE-Mail


Description
The MAX706P/R/S/T, MAX706AP/AR/AS/AT, and MAX708R/S/T microprocessor (µP) supervisory circuits reduce the complexity and number of components required to monitor +3V power-supply levels in +3V to +5V µP systems. These devices significantly improve system reliability and accuracy compared to separate ICs or discrete components.

The MAX706P/R/S/T and MAX706AP/AR/AS/AT supervisory circuits provide the following four functions:
    1) A reset output during power-up, power-down, and brownout conditions.
    2) An independent watchdog output that goes low if the watchdog input has not been toggled within 1.6s.
    3) A 1.25V threshold detector for power-fail warning, low-battery detection, or for monitoring a power supply other than the main supply.
    4) An active-low, manual-reset input.
The only difference between the MAX706R/AR, MAX706S/AS, and MAX706T/AT is the reset-threshold voltage levels, which are 2.63V, 2.93V, and 3.08V, respectively. All have active-low reset output signals. The MAX706P/AP are identical to the MAX706R/AR, except the reset output signal is active-high. The watchdog timer function for the MAX706AP/AR/AS/AT disables when the WDI input is left open or connected to a high-impedance state of a low-leakage tri-state output.

The MAX708R/S/T provide the same functions as the MAX706R/S/T and MAX706AR/AS/AT except they do not have a watchdog timer. Instead, they provide both active-low RESET and RESET outputs. As with the MAX706, devices with R, S, and T suffixes have reset thresholds of 2.63V, 2.93V, and 3.08V, respectively.

These devices are available in 8-pin SO, DIP, and µMAX® packages and are fully specified over the operating temperature range.

Key Features   Applications/Uses
  • µMAX Package, Small 8-Pin SO
  • Precision Supply-Voltage Monitors
    • 2.63V (MAX706P/R, MAX706AP/AR, and MAX708R)
    • 2.93V (MAX706S, MAX706AS, and MAX708S)
    • 3.08V (MAX706T, MAX706AT, and MAX708T)
  • 200ms Reset Time Delay
  • Debounced TTL/CMOS-Compatible Manual Reset Input
  • 100µA Quiescent Current
  • WDI Disable Feature (MAX706AP/AR/AS/AT)
  • Watchdog Timer: 1.6s Timeout
  • Reset Output Signal:
    • Active-High Only (MAX706P, MAX706AP)
    • Active-Low Only (MAX706R/S/T, MAX706AR/AS/AT)
    • Active-High and Active-Low (MAX708R/S/T)
  • Voltage Monitor for Power-Fail or Low-Battery Warning
  • 8-Pin Surface-Mount Package
  • Guaranteed active-low RESET Assertion to VCC = 1V

 
  • Battery-Powered Equipment
  • Computers
  • Controllers
  • Critical µP Power Monitoring
  • Intelligent Instruments
  • Portable Instruments

Key Specifications:  Supervisors (1 Monitored Voltage)
Part Number Reset Thresh.
(V)
Reset Out Reset Out tRESET Watchdog Feature Watchdog Timeout Supervisor Features Reset Thresh. Accur.
(%)
ICC
(µA)
Price
Active Low Active High min @ +25°C max See Notes
MAX706P  2.5 to 3.3 - Push-Pull 85ms to 300ms
Input (WDI)
Input/Output (WDI/WDO)
1s to 2s
Adjustable Reset Input
Manual Reset
Power Fail Comparator/Low Battery Detect
2.5 200 $1.71 @1k
MAX706R  Push-Pull -
Input (WDI)
Input/Output (WDI/WDO)
1s to 2s $1.71 @1k
MAX706S  Push-Pull -
Input (WDI)
Input/Output (WDI/WDO)
1s to 2s $1.71 @1k
MAX706T  Push-Pull -
Input (WDI)
Input/Output (WDI/WDO)
1s to 2s $1.71 @1k
MAX708R  Push-Pull Push-Pull No Watchdog - $1.63 @1k
MAX708S  Push-Pull Push-Pull No Watchdog - $1.63 @1k
MAX708T  Push-Pull Push-Pull No Watchdog - $1.63 @1k
See All Supervisors (1 Monitored Voltage) (274)

Diagram
MAX706AP, MAX706AR, MAX706AS, MAX706AT, MAX706P, MAX706R, MAX706S, MAX706T, MAX708R, MAX708S, MAX708T: Pin Configuration
Pin Configuration

Design Guides
  • Microprocessor Supervisory (PDF)
  • Wireless Infrastructure (PDF)
  • Low-Power Notebook ICs (PDF)
  • Wireless (PDF)

    Reliability Reports
  • Show FIT data for:
  • Request Reliability Report for:

    Software/Models
    none

    Ordering Information
    Notes:

    1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
    2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
    3. Part number suffixes: T or T&R = tape and reel;+ = RoHS/lead-free;# = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions.
    4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.


    Filter:
    Devices: 1-100 of 151
    1 2  --->

    MAX706AP Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX706APEPA+    
    Active PDIP(N);8 pin;79.7 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706APESA+  
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706APESA+T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX706APEUA+    
    Active µMAX;8 pin;16.2 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706APEUA+T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX706AR Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX706AREPA+    
    Active PDIP(N);8 pin;79.7 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706ARESA+  
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706ARESA+T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX706AREUA+    
    Active µMAX;8 pin;16.2 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706AREUA+T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX706AS Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX706ASEPA+  
    Active PDIP(N);8 pin;79.7 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706ASESA+T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX706ASESA+  
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706ASEUA+T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX706ASEUA+    
    Active µMAX;8 pin;16.2 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706AT Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX706ATEPA+    
    Active PDIP(N);8 pin;79.7 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706ATESA+  
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706ATESA+T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX706ATEUA+  
    Active µMAX;8 pin;16.2 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706ATEUA+T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX706P Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX706PMJA    
    Active CDIP(N);8 pin;82.6 mm²
    Outline Drawing: 21-0045 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: J8-2*
    -55°C to +125°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706PC/D    
    Active DICE SALES;NA pin;0 mm²

    Land Pattern: Not Applicable
    Use pkgcode/variation: DICE*
    See data sheet
    MAX706PCPA  
    Active PDIP(N);8 pin;79.7 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8-1*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706PEPA    
    Active PDIP(N);8 pin;79.7 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706PESA+  
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706PESA+T    
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706PCSA  
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-2*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706PCSA-T    
    Active

    Land Pattern: Not Available

    0°C to +70°C See data sheet
    MAX706PCSA+  
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+2*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706PCSA+T    
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+2*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706PESA    
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-2*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706PESA-T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX706PCUA    
    Active µMAX;8 pin;16.2 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8-1*
    RoHS/Lead-Free: No
    Materials Analysis
    MAX706PCUA-T    
    Active µMAX;8 pin;16.2 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8-1*
    RoHS/Lead-Free: No
    Materials Analysis
    MAX706PEUA    
    Active µMAX;8 pin;16.2 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706PEUA-T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX706R Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX706RMJA    
    Active CDIP(N);8 pin;82.6 mm²
    Outline Drawing: 21-0045 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: J8-2*
    -55°C to +125°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706RC/D    
    Active DICE SALES;NA pin;0 mm²

    Land Pattern: Not Applicable
    Use pkgcode/variation: DICE*
    See data sheet
    MAX706RCPA    
    Active PDIP(N);8 pin;79.7 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8-1*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706REPA    
    Active PDIP(N);8 pin;79.7 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706RCSA  
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-2*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706RCSA-T    
    Active

    Land Pattern: Not Available

    0°C to +70°C See data sheet
    MAX706RCSA+  
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+2*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706RCSA+T    
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+2*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706RESA    
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-2*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706RESA-T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX706RESA+  
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706RESA+T    
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706RCUA  
    Active µMAX;8 pin;16.2 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8-1*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706RCUA-T    
    Active µMAX;8 pin;16.2 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8-1*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706RCUA+  
    Active µMAX;8 pin;16.2 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8+1*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706RCUA+T    
    Active µMAX;8 pin;16.2 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8+1*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706REUA    
    Active µMAX;8 pin;16.2 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706REUA-T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX706REUA+  
    Active µMAX;8 pin;16.2 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706REUA+T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX706S Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX706SC/D    
    Active

    Land Pattern: Not Available

    See data sheet
    MAX706SMJA    
    Active CDIP(N);8 pin;82.6 mm²
    Outline Drawing: 21-0045 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: J8-2*
    -55°C to +125°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706SCPA    
    Active PDIP(N);8 pin;79.7 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8-1*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706SEPA    
    Active PDIP(N);8 pin;79.7 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706SCSA  
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-2*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706SCSA-T    
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-2*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706SCSA+  
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+2*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706SCSA+T    
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+2*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706SESA    
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-2*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706SESA-T    
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-2*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706SESA+  
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706SESA+T    
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706SCUA+  
    Active µMAX;8 pin;16.2 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8+1*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706SCUA+T    
    Active µMAX;8 pin;16.2 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8+1*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706SEUA+  
    Active µMAX;8 pin;16.2 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706SEUA+T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX706T Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX706TMJA  
    Active CDIP(N);8 pin;82.6 mm²
    Outline Drawing: 21-0045 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: J8-2*
    -55°C to +125°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706TC/D    
    Active DICE SALES;NA pin;0 mm²

    Land Pattern: Not Applicable
    Use pkgcode/variation: DICE*
    See data sheet
    MAX706TCPA+  
    Active PDIP(N);8 pin;79.7 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8+1*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706TCPA    
    Active PDIP(N);8 pin;79.7 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8-1*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706TEPA    
    Active PDIP(N);8 pin;79.7 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706TCSA  
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-2*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706TCSA-T    
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-2*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706TCSA+  
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+2*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706TCSA+T    
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+2*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706TESA    
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-2*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706TESA-T    
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-2*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706TESA+  
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706TESA+T    
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706TEUA+T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX706TEUA+  
    Active µMAX;8 pin;16.2 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706TCUA  
    Active µMAX;8 pin;16.2 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8-1*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706TCUA-T    
    Active µMAX;8 pin;16.2 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8-1*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706TCUA+  
    Active µMAX;8 pin;16.2 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8+1*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706TCUA+T    
    Active µMAX;8 pin;16.2 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8+1*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX706TEUA  
    Active µMAX;8 pin;16.2 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX706TEUA-T    
    Active µMAX;8 pin;16.2 mm²
    Outline Drawing: 21-0036 (PDF)
    Land Pattern: 90-0092 (PDF)
    Use pkgcode/variation: U8-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX708R Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX708RMJA    
    Active CDIP(N);8 pin;82.6 mm²
    Outline Drawing: 21-0045 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: J8-2*
    -55°C to +125°C RoHS/Lead-Free: No
    Materials Analysis
    MAX708RC/D    
    Active DICE SALES;NA pin;0 mm²

    Land Pattern: Not Applicable
    Use pkgcode/variation: DICE*
    See data sheet
    MAX708RCPA+  
    Active PDIP(N);8 pin;79.7 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8+1*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX708RCPA  
    Active PDIP(N);8 pin;79.7 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8-1*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX708REPA    
    Active PDIP(N);8 pin;79.7 mm²
    Outline Drawing: 21-0043 (PDF)
    Land Pattern: Not Applicable
    Use pkgcode/variation: P8-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX708RCSA  
    Active SOIC(N);8 pin;30.9 mm²
    Outline Drawing: 21-0041 (PDF)
    Land Pattern: 90-0096 (PDF)
    Use pkgcode/variation: S8-2*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX708RCSA-T    
    Active

    Land Pattern: Not Available

    0°C to +70°C See data sheet
    Filter:
    Devices: 1-100 of 151
    1 2  --->


    Related Products
    MAX6316, MAX6316M, MAX6317, MAX6318, MAX6319, MAX6320, MAX6321, MAX6322 5-Pin µP Supervisory Circuits with Watchdog and Manual Reset
    MAX6351, MAX6352, MAX6353, MAX6354, MAX6355, MAX6356, MAX6357, MAX6358, MAX6359, MAX6360 Dual/Triple-Voltage µP Supervisory Circuits

    More Like This: View Product Families for Similar Products

    Didn't Find What You Need?
  • Next Day Product Selection Assistance from Applications Engineers
  • Parametric Search
  • Applications Help
  •  QuickView   Technical Documents   Ordering Info   More Information  
     Description 
     Key Features 
     Applications/Uses 
     Key Specifications 
     Diagram 

     Data Sheet 
     Application Notes 
     Design Guides 
     Engineering Journals 
     Reliability Reports 
     Software/Models 
     Evaluation Kits 

     Price and Availability 
     Samples 
     Buy Online 
     Package Information 
     Lead-Free Information 

     Related Products 
     Notes and Comments 
     Evaluation Kits 

    Document Ref.: 19-0099; Rev 5; 2006-05-03
    This page last modified: 2009-11-09


            •         •         •     Privacy Policy     •     Legal Notices

        Copyright © 2009 by Maxim Integrated Products