ENGLISH 简体中文 日本語 한국어  

MAX792, MAX792L, MAX792M, MAX792R, MAX792S, MAX792T, MAX820, MAX820L, MAX820M, MAX820R, MAX820S, MAX820T
Microprocessor and Nonvolatile Memory Supervisory Circuits

Microprocessor and Non-Volatile Memory Supervisory Circuits


  QuickView     Technical Documents     Ordering Info     More Information     User Comments (0)     All  
Data Sheet
FULL DATA SHEET (PDF, 348kB)
Download this datasheet in PDF formatDownload   Send this datasheet to any email addressE-Mail


Description
The MAX792/MAX820 microprocessor (µP) supervisory circuits provide the most functions for power-supply and watchdog monitoring in systems without battery backup. Built-in features include the following:
  • µP reset: Assertion of RESET and active-low RESET outputs during power-up, power-down, and brownout conditions. Active-low RESET is guaranteed valid for VCC down to 1V.
  • Manual-reset input.
  • Two-stage power-fail warning: A separate low-line comparator compares VCC to a preset threshold 120mV above the reset threshold; the low-line and reset thresholds can be programmed externally.
  • Watchdog fault output: Assertion of active-low WDO if the watchdog input is not toggled within a preset timeout period.
  • Pulsed watchdog output: Advance warning of impending active-low WDO assertion from watchdog timeout that causes hardware shutdown.
  • Write protection of CMOS RAM, EEPROM, or other memory devices.
The MAX792 and MAX820 are identical, except the MAX820 guarantees higher low-line and reset threshold accuracy (±2%).

Key Features   Applications/Uses
  • Manual-Reset Input
  • 200ms Power OK/Reset Time Delay
  • Independent Watchdog Timer-Preset or Adjustable
  • On-Board Gating of Chip-Enable Signals
  • Memory Write-Cycle Completion
  • 10ns (max) Chip-Enable Gate Propagation Delay
  • Voltage Monitor for Overvoltage Warning
  • ±2% Reset and Low-Line Threshold Accuracy (MAX820, external programming mode)

 
  • Computers: Desktop, Workstation, Server
  • Controllers
  • Critical µP Monitoring
  • Intelligent Instruments

    Key Specifications:   Supervisors (1 Monitored Voltage)
    Part Number Reset Threshold Range (V) Active-Low Reset Output Active-High Reset Output Min. Reset Timeout Range Watchdog Feature Nom. Watchdog Timeout Range Supervisor Features Reset Thresh. Acc. (% @+25°C) Max. ICC (µA) Price**
    MAX792  2.5 to 3.3
    3.3 to 5.5
    Push-Pull Push-Pull 85ms to 300ms Input (WDI)
    Input/Output (WDI/WDO)
    Cap Adjustable
    1s to 2s
    <1s
    >2s
    Adjustable
    Manual Reset
    Power Fail Comparator
    2.5 150 $3.48 @ 1k
    MAX820  $3.82 @ 1k
    See All Supervisors (1 Monitored Voltage) (268)
    Notes:
    **This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

    Diagram
    MAX792, MAX792L, MAX792M, MAX792R, MAX792S, MAX792T, MAX820, MAX820L, MAX820M, MAX820R, MAX820S, MAX820T: Typical Operating Circuit
    Typical Operating Circuit

    Evaluation Kits
    none

    Design Guides
  • Microprocessor Supervisory (PDF)

    Reliability Reports
  • Show FIT data for:
  • Reliability Report: MAX792xxxE.pdf
  • Request Reliability Report for:

    Software/Models
    none

    Ordering Information
    Notes:

    1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
    2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
    3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions.
    4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.


    Filter:

    Devices: 1-100 of 150

    1 2  --->

    MAX792L Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX792LEJE  
    Ceramic DIP;16 pin;
    Dwg: 21-0045 (PDF)
    Use pkgcode/variation: J16-3*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792LMJE  
    Ceramic DIP;16 pin;
    Dwg: 21-0045 (PDF)
    Use pkgcode/variation: J16-3*
    -55°C to +125°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792LC/D  
    DICE SALES;

    Use pkgcode/variation: DICE*
    See data sheet
    MAX792LCPE+  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16+1*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792LCPE  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16-1*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792LEPE  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792LEPE+  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792LCSE  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16-3*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792LCSE-T  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16-3*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792LCSE+T  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792LCSE+  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792LESE+  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792LESE-T  



    -40°C to +85°C See data sheet
    MAX792LESE  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16-3*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792LESE+T  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792M Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX792MEJE  
    Ceramic DIP;16 pin;
    Dwg: 21-0045 (PDF)
    Use pkgcode/variation: J16-3*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792MMJE  
    Ceramic DIP;16 pin;
    Dwg: 21-0045 (PDF)
    Use pkgcode/variation: J16-3*
    -55°C to +125°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792MC/D  
    DICE SALES;

    Use pkgcode/variation: DICE*
    See data sheet
    MAX792MCPE  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16-1*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792MCPE+  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16+1*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792MEPE  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792MEPE+  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792MCSE-T  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16-3*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792MCSE  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16-3*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792MCSE+  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792MCSE+T  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792MESE+T  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792MESE+  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792MESE  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16-3*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792MESE-T  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16-3*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792R Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX792REJE  
    Ceramic DIP;16 pin;
    Dwg: 21-0045 (PDF)
    Use pkgcode/variation: J16-3*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792RMJE  
    Ceramic DIP;16 pin;
    Dwg: 21-0045 (PDF)
    Use pkgcode/variation: J16-3*
    -55°C to +125°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792RC/D  
    DICE SALES;

    Use pkgcode/variation: DICE*
    See data sheet
    MAX792RCPE  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16-1*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792RCPE+  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16+1*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792REPE+  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792REPE  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792RCSE+  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792RCSE  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16-3*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792RCSE-T  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16-3*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792RCSE+T  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792RESE+  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792RESE+T  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792RESE-T  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16-3*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792RESE  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16-3*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792S Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX792SEJE  
    Ceramic DIP;16 pin;
    Dwg: 21-0045 (PDF)
    Use pkgcode/variation: J16-3*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792SMJE  
    Ceramic DIP;16 pin;
    Dwg: 21-0045 (PDF)
    Use pkgcode/variation: J16-3*
    -55°C to +125°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792SC/D  
    DICE SALES;

    Use pkgcode/variation: DICE*
    See data sheet
    MAX792SCPE+  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16+1*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792SCPE  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16-1*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792SEPE  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792SEPE+  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792SCSE  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16-3*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792SCSE-T  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16-3*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792SCSE+  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792SCSE+T  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792SESE+T  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792SESE+  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792SESE-T  



    -40°C to +85°C See data sheet
    MAX792SESE  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16-3*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792T Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX792TEJE  
    Ceramic DIP;16 pin;
    Dwg: 21-0045 (PDF)
    Use pkgcode/variation: J16-3*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792TMJE  
    Ceramic DIP;16 pin;
    Dwg: 21-0045 (PDF)
    Use pkgcode/variation: J16-3*
    -55°C to +125°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792TC/D  
    DICE SALES;

    Use pkgcode/variation: DICE*
    See data sheet
    MAX792TCPE  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16-1*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792TCPE+  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16+1*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792TEPE  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792TEPE+  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792TCSE+T  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792TCSE+  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792TCSE  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16-3*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792TCSE-T  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16-3*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792TESE  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16-3*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792TESE-T  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16-3*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX792TESE+T  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX792TESE+  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX820L Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX820LEJE  
    Ceramic DIP;16 pin;
    Dwg: 21-0045 (PDF)
    Use pkgcode/variation: J16-3*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX820LMJE  
    Ceramic DIP;16 pin;
    Dwg: 21-0045 (PDF)
    Use pkgcode/variation: J16-3*
    -55°C to +125°C RoHS/Lead-Free: No
    Materials Analysis
    MAX820LC/D  
    DICE SALES;

    Use pkgcode/variation: DICE*
    See data sheet
    MAX820LCPE  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16-1*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX820LCPE+  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16+1*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX820LEPE+  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX820LEPE  
    PDIP;16 pin;
    Dwg: 21-0043 (PDF)
    Use pkgcode/variation: P16-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX820LCSE  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16-3*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX820LCSE-T  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16-3*
    0°C to +70°C RoHS/Lead-Free: No
    Materials Analysis
    MAX820LCSE+  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX820LCSE+T  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    0°C to +70°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX820LESE-T  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16-3*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX820LESE  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16-3*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX820LESE+  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX820LESE+T  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+3*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX820M Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX820MEJE