QuickView - MAX253 Transformer Driver for Isolated RS-485 Interface

Description

FULL DATA SHEET (PDF, 832kB)
Download	E-Mail

The MAX253 is a monolithic oscillator/power-driver, specifically designed to provide isolated power for an isolated RS-485 or RS-232 data interface. It drives a center-tapped transformer primary from a 5V or 3.3V DC power supply. The secondary can be wound to provide any isolated voltage needed at power levels up to 1W.

The MAX253 consists of a CMOS oscillator driving a pair of N-channel power switches. The oscillator runs at double the output frequency, driving a toggle flip-flop to ensure 50% duty cycle to each of the switches. Internal delays are arranged to ensure break-before-make action between the two switches.

The SD pin puts the entire device into a low-power shutdown state, disabling both the power switches and oscillator.

Key Features

Applications/Uses

Power-Supply Transformer Driver for Isolated RS-485/RS-232 Data-Interface Applications
Single +5V or +3.3V Supply
Low-Current Shutdown Mode: 0.4µA
Pin-Selectable Frequency: 350kHz or 200kHz
8-Pin DIP, SO, and µMAX Packages

	Bridge Ground Differentials
	High Noise-Immunity Communications Interface
	Isolated and/or High-Voltage Power Supplies
	Isolated RS-485/RS-232 Power Supply
	Medical Equipment
	Process Control
	Transformer Driver