[PDF] Simple, Latched Overcurrent Fault Detector Has Fast Response Time ...   [Open results in new window]
... APPLICATION NOTE 3948 Simple, Latched Overcurrent Fault Detector Has Fast Response
Time ... To calculate the gate response time, use the following equation: ...
pdfserv.maxim-ic.com/en/an/AN3948.pdf

Simple, Latched Overcurrent Fault Detector Has Fast Response Time ...   [Open results in new window]
... APPLICATION NOTE 3948. Simple, Latched Overcurrent Fault Detector Has Fast Response
Time. ... To calculate the gate response time, use the following equation: ...
www.maxim-ic.com/appnotes.cfm/an_pk/3948 - 25k

[PDF] Small Footprint, 10us Response Time, 10mV Output Ripple, 1MHz, 6A ...   [Open results in new window]
... Regulator Nov 11, 2002 APPLICATION NOTE 1782 Small Footprint, 10us Response
Time, 10mV Output Ripple, 1MHz, 6A Step-Down Regulator ...
pdfserv.maxim-ic.com/en/an/AN1782.pdf

Lowpass Filter Has Improved Step Response - Maxim   [Open results in new window]
... perturbation during the cutoff-frequency transition, but is five times faster than
that of the unmodified circuit. Figure 2. Time-domain response for the ...
www.maxim-ic.com/appnotes.cfm/an_pk/3203 - 20k

[PDF] Lowpass Filter Has Improved Step Response - AN3203   [Open results in new window]
... perturbation during the cutoff-frequency transition, but is five times faster than
that of the unmodified circuit. Figure 2. Time-domain response for the ...
pdfserv.maxim-ic.com/en/an/AN3203.pdf

[PDF] The MAX2206/MAX2208 Power Detectors for CDMA Applications - AN1013   [Open results in new window]
... PP , while the response time becomes 350µs. ... The required response time of most
CDMA systems is not very restraining, typically less than 500µs. ...
pdfserv.maxim-ic.com/en/an/AN1013.pdf

Using the DS5240/DS5250 as Drop-In Upgrades for the DS5002 - Maxim   [Open results in new window]
... Port Timed-Access Protection, RAR.3 (TAP)-Timed-Access Port ... an external 32.768kHz
crystal) useful for time stamping and ... that can trigger a DRS in response to a ...
www.maxim-ic.com/appnotes.cfm/appnote_number/2034 - 47k

[PDF] How to Increase the Operating Speed on the MAX4007 - AN4057   [Open results in new window]
... very useful for GPON burst-mode controllers that need response times in 100's ... components
for the circuit, we can greatly improve the MAX4007's response time. ...
pdfserv.maxim-ic.com/en/an/AN4057.pdf

How to Increase the Operating Speed on the MAX4007 - Maxim   [Open results in new window]
... very useful for GPON burst-mode controllers that need response times in 100's ... components
for the circuit, we can greatly improve the MAX4007's response time. ...
www.maxim-ic.com/appnotes.cfm/an_pk/4057 - 21k

The MAX2206/MAX2208 Power Detectors for CDMA Applications - Maxim   [Open results in new window]
... Extra filtering is used to reduce the ripple to 50mV PP , while the response time
becomes 350µs. ... For the MAX2206, response time was measured at 240µs. ...
www.maxim-ic.com/appnotes.cfm/an_pk/1013 - 28k

[PDF] How to Achieve a 300:1 Dimming Ratio with the DS3881/DS3882 CCFL ...   [Open results in new window]
... CCFL lamps have a relatively slow response time of about 50µs to 75µs,
which limits the minimum burst on-time. If the burst on ...
pdfserv.maxim-ic.com/en/an/AN3997.pdf

How to Achieve a 300:1 Dimming Ratio with the DS3881/DS3882 CCFL ...   [Open results in new window]
... CCFL lamps have a relatively slow response time of about 50µs to 75µs,
which limits the minimum burst on-time. If the burst on ...
www.maxim-ic.com/appnotes.cfm/an_pk/3997 - 24k

MAX3967A: Improving Speed Performance of Slow LEDs Using the ...   [Open results in new window]
... Keywords: MAX3967A, shunt peaking technique, LED, eye quality, edge speed, modulation
current, temperature increase, response time. Related Parts. ...
www.maxim-ic.com/appnotes.cfm/an_pk/3790 - 18k

[PDF] HFDN-39.0   [Open results in new window]
... a good candidate for exchanging drive for an improved response time. ... at best, with
a very slow fall time evident. Rise and fall times are about 2.5ns and 4.5ns ...
pdfserv.maxim-ic.com/en/an/AN3790.pdf

[PDF] Implementing Cold-Junction Compensation in Thermocouple ...   [Open results in new window]
... Abstract: Thermocouples are one of the most widely used temperature-measurement
devices because of their ruggedness, repeatability, and fast response time. ...
pdfserv.maxim-ic.com/en/an/AN4026.pdf

Implementing Cold-Junction Compensation in Thermocouple ...   [Open results in new window]
... Abstract: Thermocouples are one of the most widely used temperature-measurement
devices because of their ruggedness, repeatability, and fast response time. ...
www.maxim-ic.com/appnotes.cfm/an_pk/4026 - 39k

[PDF] Positive Analog Feedback Compensates PT100 Transducer - AN3450   [Open results in new window]
... Table 1. Sensor Attributes Feature Thermocouple RTD Response time Better Maximum
temperature Higher Ruggedness Better Cost efficiency Better Accuracy Better ...
pdfserv.maxim-ic.com/en/an/AN3450.pdf

Positive Analog Feedback Compensates PT100 Transducer - Maxim   [Open results in new window]
... Table 1. Sensor Attributes Feature, Thermocouple, RTD. Response time, Better, Maximum
temperature, Higher, Ruggedness, Better, Cost efficiency, Better, Accuracy ...
www.maxim-ic.com/appnotes.cfm/an_pk/3450 - 39k

Single Transistor Reduces LDO Noise by 46dB - Maxim   [Open results in new window]
... both low-frequency and high-frequency noise by setting the corner frequency very
low, but a low corner frequency also slows the regulator's response time. ...
www.maxim-ic.com/appnotes.cfm/an_pk/3656 - 20k

[PDF] Single Transistor Reduces LDO Noise by 46dB - AN3656   [Open results in new window]
... both low-frequency and high-frequency noise by setting the corner frequency very
low, but a low corner frequency also slows the regulator's response time. ...
pdfserv.maxim-ic.com/en/an/AN3656.pdf