Search Results: Debounce

Switch-Debouncer IC Creates A Long-Period Timer - マキシム [Open results in new window]
... Figure 1. In addition to debouncing the microcontroller's ... the unused half of this
dual switch-debouncer IC (U1 ... debouncer U1 are configured to debounce the µC's ...
japan.maxim-ic.com/appnotes.cfm/an_pk/893 - 23k

Using a Keypad and LCD Display with the MAXQ2000 - マキシム [Open results in new window]
... A[15] jump E, State4_End ; Ignore the last debounced pattern cmp A ... last keypad read
move LC[0], #DEBOUNCE move A ... The debouncing code will ensure that if a second ...
japan.maxim-ic.com/appnotes.cfm/an_pk/3414 - 36k

Where Is Ground? - マキシム [Open results in new window]
... pot floating near +30V with self-debouncing switches. ... 25V and +30V with internally
debounced switches ... They have internal circuitry to debounce the switches and ...
japan.maxim-ic.com/appnotes.cfm/an_pk/4292/ - 33k

Interfacing Switches and Relays to the Real World in Real Time ... [Open results in new window]
... RAM, interrupts, and even polling to debounce inputs) are ... A new debouncing technique
employs a switch-debouncer ... before the relay is assumed debounced), and if ...
japan.maxim-ic.com/appnotes.cfm/an_pk/764/ - 52k

Manually Operated Digital Potentiometer Doesn't Need a ... [Open results in new window]
... キーワード: digital potentiometer, digipot, watchdog timer, switch debouncer, esd
protection, digital pots, potentiometers, push button circuit. ...
japan.maxim-ic.com/appnotes.cfm/an_pk/1118 - 22k

Using the DS1814 MicroMonitor to Control Microprocessor Resets ... [Open results in new window]
... Since the input is internally debounced, there is no need for any external circuitry
to debounce the pushbutton reset ... No debouncing circuitry is required. ...
japan.maxim-ic.com/appnotes.cfm/an_pk/164 - 29k

Advantages of Using a MicroMonitor and a Simple Application ... [Open results in new window]
... power on reset, por, push-button reset, manual reset, debounced, power fail ... The DS1232
will also debounce a momentary switch without additional hardware, making ...
japan.maxim-ic.com/appnotes.cfm/an_pk/581 - 51k

Industrial 0V to +10V Digital Potentiometer - マキシム [Open results in new window]
... U2 is a switch debouncer that provides (in addition to the debouncing) a
40ms fixed delay between its outputs and the switch action. ...
japan.maxim-ic.com/appnotes.cfm/an_pk/843 - 23k

ESD-Protected EPOT System has Pushbutton Interface - マキシム [Open results in new window]
... down) and a few tiny silicon devices to implement a debounced, ESD-protected ... normally
open pushbutton switches feed into an ESD-protected switch debouncer in a ...
japan.maxim-ic.com/appnotes.cfm/an_pk/1802 - 22k

PDA ... [Open results in new window]
... 合計で64個のキーとなります。 // A Write Command to disable GPO ports 0x70// MAX7359
device address 0x02// GPO enable and debounce register 0x00 ...
japan.maxim-ic.com/appnotes.cfm/an_pk/4054 - 35k

Using the MAXQ3210 as a Microprocessor Supervisor - マキシム [Open results in new window]
... a variety of microprocessor supervision and support tasks including power-on reset
control, power sequencing, watchdog timeout, and input switch debouncing. ...
japan.maxim-ic.com/appnotes.cfm/an_pk/3932 - 32k

The MAXQ Microcontroller in Action: Designing a Bicycle Computer ... [Open results in new window]
... The main loop is also responsible for debouncing on the pushbuttons; it disables ...
After the debounce routine, the code determines which sensors it needs to read ...
japan.maxim-ic.com/appnotes.cfm/an_pk/3845 - 44k

Pushbuttons Control Regulated Switching Converter - マキシム [Open results in new window]
... Pushbutton control is simpler, but the digipot's inputs have no switch-debounce
capability, and its up/down control is not particularly suitable for pushbuttons ...
japan.maxim-ic.com/appnotes.cfm/an_pk/3535 - 22k

Adding Global LED Intensity Control to the MAX6954 and MAX6955 LED ... [Open results in new window]
... The driver also includes five I/O expander (GPIO) ports, and logic for using some
or all of these ports to scan and debounce a key matrix up to 32 keys. ...
japan.maxim-ic.com/appnotes.cfm/an_pk/1148 - 22k

One Button Turns Microprocessor On and Off - マキシム [Open results in new window]
... resetting the µP. The pinhole reset ties directly to IC2's manual reset input,
and requires no external debounce circuitry. When closed ...
japan.maxim-ic.com/appnotes.cfm/an_pk/3283 - 23k

MAX1233/MAX1234 ... [Open results in new window]
... TW KC bf00, Wait for keypress; maximum debounce and hold times, 0x0041 0xbf00, ... TW
KC bf00, Wait for keypress; maximum debounce and hold times, 0x0041 0xbf00, ...
japan.maxim-ic.com/appnotes.cfm/an_pk/4125 - 93k

Handy Circuit Gives Systems Flexible Fault Protection ... [Open results in new window]
... for 20µs minimum. The switch debouncer (U2) has inputs protected to ±15kV
for ESD and to ±25V for circuit faults. Its input (shown ...
japan.maxim-ic.com/appnotes.cfm/an_pk/2378/ - 24k

Flexible Fault Protection - マキシム [Open results in new window]
... for 20µS minimum. The switch debouncer (U2) has inputs protected to ±15kV
for ESD and to ±25V for circuit faults. Its input (shown ...
japan.maxim-ic.com/appnotes.cfm/an_pk/2765 - 24k